Selling my Forgeline wheels

[Kansas Car Guy]

When I bought my Z/28 last fall, it had newly installed Forgeline GA1R "open lug cap" wheels, gloss black powder coat finish, 19"x11" and 19"x12"

Here is a link to the Forgeline website: https://forgeline.com/wheel/ga1r-open-lug-cap-edition/

The wheels are the same as new, not a scratch or chip anywhere. The car has only 1000 miles, and the wheels have only a few miles on them. The dealer acquired the car with the wheels and did not know the history, or at least claimed not to know.

The rear wheels have a date code of May 2018, I bought the car in October, they had it in stock for four months, so the wheels were hardly used.
I replaced the wheels with stock Z/28 wheels just after I got the car.

They have been in my garage since then and it is time to sell them.
List price for the wheels new is $1645 front and $1660 rear, total $6610.

I will sell them for $4000 picked up in Salina, Kansas, or I will pack and ship them for my actual cost UPS insured.

I am posting in the Z/28 forum because the wheels are made to fit a Z/28.
I will also post in the "wheels for sale" section.

[cdb95z28]

Actually, those are GS1R Forgelines, while similar to the GA1R, the differences are subtle. Compare the outer rim and how it transforms into the barrel.

Otherwise, great looking wheels and a great price. I have gloss black GA1R's on my '14 1LE for the track.

[Kansas Car Guy]

Originally Posted by cdb95z28

Actually, those are GS1R Forgelines, while similar to the GA1R, the differences are subtle. Compare the outer rim and how it transforms into the barrel.

Otherwise, great looking wheels and a great price. I have gloss black GA1R's on my '14 1LE for the track.
Attachment 981893

Thank you for the correction, they are GS1R with special machining for center caps.

Here is the correct link to the Forgeline website: https://forgeline.com/wheel/gs1r/

The description states the GS1R is up to 1 pound lighter than the GA1R.

The wheel pricing is the same, but the special machining for center caps adds $75 to the retail price of each wheel.

[aris]

Do you happen to have the offsets?

[Kansas Car Guy]

Originally Posted by aris

Do you happen to have the offsets?

I have not measured the offsets, but I will do that for you.

It may take a day to get it done, but I will measure and post the offsets here.

[Kansas Car Guy]

I measured the wheels:

Front backspace = 6.75"
Rear backspace = 7.875" (measured from the inner rim edge to the hub mount surface)

Front offset = +0.81"
Rear offset = +1.44" (measured from the wheel width center line to the hub mount surface)

Overall width of the wheels:
Front = 11.875" (11" wide wheel)
Rear = 12.875" (12" wide wheel)

[j o n]

Originally Posted by Kansas Car Guy

I measured the wheels:

Front backspace = 6.75"
Rear backspace = 7.875" (measured from the inner rim edge to the hub mount surface)

Front offset = +0.81" 20.574mm
Rear offset = +1.44" 36.576mm (measured from the wheel width center line to the hub mount surface)

Overall width of the wheels:
Front = 11.875" (11" wide wheel)
Rear = 12.875" (12" wide wheel)

offset put into mm units