[Sephx1]

Asked this question in someone else’s thread but haven’t got much response from it. 2018 1SS 1LE track only car would like to remove front belts to save weight. I see a lot of you are making the effort to reinstall them (BK seat mounts). Is it difficult to make it work (no CEL, airbag or sat belt lights) without them? Do I need the factory harnesses from the seats plugged in if it’s a 1SS?

[Christian1LE]

You're going to need the factory harness with a resistor on it for no lights.

[kropscamaro16]

i have the front seat belts in my car with 6 point harness and half cage but we took the rear ones out still have air bag light no biggie

[carguy55]

One of the big benefits with the BK seat mounts is they let you retain the factory belts if you want to for street use. I only do a minimal amount of street driving and its nice to have the factory belts as you shouldn't use a harness setup on the street, but some do. There are no issues with having the air bag light on with a 1SS. You just cancel the light if it bugs you. Also does not affect getting it to pass my state inspection, NASA, SCCA, etc.

[Sephx1]

The seat wiring harnesses are on national back order with no estimated delivery date. Other than the passenger presence sensor what are they needed for on a 1SS? Seat airbags can be taken care of with a resistor.