01-24-2022, 11:43 AM | #1 |
Drives: 2020 Chevy Camaro ZL1 Join Date: Feb 2021
Location: NJ
Posts: 2
|
ZL1 headers question
I currently have a 2020 ZL1 with factory headers still and a Borla ATAK cat-back exhaust system. A buddy of mine recently sold his ZL1 and wants to sell me his American Racing long tube headers for next to nothing. Obviously I can't install them as they sit with the Borla cat back I have, but is there any way to modify them so that it would work?
|
01-24-2022, 12:19 PM | #2 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
I initially had the Borla Sport system with stock headers. Shop was able to adapt the full borla catback system to meet up with the ARH midpipe slip over fittings.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
01-24-2022, 12:27 PM | #3 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
You just have to lay all the parts out and see what it looks like. I started with AWE axleback, added AWE link pipes, then did ARH headers and X-pipe, then added resonators. They aren’t specifically designed to mate up but after an hour with a cutoff wheel and the band clamps that came with the systems I made it work.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
01-24-2022, 01:10 PM | #4 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
As long as you do not remove the cats, a good muffler/exhaust shop will be able to fabricate the necessary connections. Keep in mind that you will need a tune and that a quality set of plug wire sleeves are a good investment.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
01-26-2022, 03:48 PM | #5 |
Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021
Location: Lutz, FL
Posts: 78
|
I have borla ATAK entire system with CSP headers and did the install myself. Everything will fit.
Mark |
|
|
Post Reply
|
|
|