02-18-2021, 02:58 PM | #1 |
Drives: 2021 ZL1 1LE Join Date: Jun 2020
Location: Ohio
Posts: 20
|
Recommended Aftermarket/Performance Vendors
Hey folks, What would the audience here say are the "Recommended Vendors" for aftermarket and performance services? I've seen Jannetty Racing and Weapon X pop up a few times, but I'm sure there are others.
Thanks! |
02-18-2021, 03:02 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
wildhammer is where i get more of my parts from also gotten some stuff from classic industries before also
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
02-18-2021, 04:06 PM | #3 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Jannetty has been awesome for me. I’ve also used RDP store, Soler and Phastek with great results.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
02-18-2021, 06:16 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,594
|
I can vouch for Ted Jannetty, too. His shop and Mike at Soler have given me what I consider the pinnacle of customer service and professionalism.
Phastek has been providing great service continuously, and I'm satisfied with RPI Designs, too. As to online parts outlets, I've had the best luck with gmpartsdirect operating out of Winston-Salem, NC. Finally, leaving out vendors I purchased only once from, the screaming chicken guys were always responsive, never had an issue with their products or service.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
02-18-2021, 06:21 PM | #5 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Complete Street
RDPstore Jannetty Racing, I have not ordered parts from them but currently doing remote tuning with him. Their customer service is the best I have ever encountered. |
02-18-2021, 06:46 PM | #6 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,557
|
KaTech, Hennessy, Lingenfelter, Jannetty, Vengeance, Xtreme, Late Model Racecraft, and a few others form builder top tier
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. Last edited by JSH; 02-18-2021 at 08:36 PM. |
02-18-2021, 06:58 PM | #7 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Jannetty Racing. Unsurpassed knowledge on this platform and the best customer service I have ever experienced.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
02-18-2021, 08:12 PM | #8 |
Drives: 18 ZL1 Convertible Join Date: Jun 2019
Location: NJ
Posts: 118
|
I ordered some stuff from Complete street and they were the best priced and fast. Excellent customer service also
|
02-18-2021, 08:28 PM | #9 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,080
|
Vengeance Racing is another.
|
02-19-2021, 09:47 AM | #10 |
Drives: 2021 ZL1 1LE Join Date: Jun 2020
Location: Ohio
Posts: 20
|
Awesome - I appreciate all of the responses. It only takes a couple bad shop /tuner experiences to taint your feelings about a car.
|
02-19-2021, 09:54 AM | #11 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,557
|
Having owned high performance cars for 50 years I can say the most shops are not qualified and not to be trusted. (The same can be said of construction contractors.)
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
02-19-2021, 12:33 PM | #12 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
....and politicians.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
02-19-2021, 12:43 PM | #13 |
Drives: 18 ZL1-1LE, 10 JKU Join Date: Jul 2018
Location: AR
Posts: 585
|
i always check with Terry Reeves at Beefcake Racing before i order anything. great customer service, easy to get hold of, prices are always good enough i stopped comparing to others.
|
02-19-2021, 02:32 PM | #14 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,557
|
Based on what just happened on another thread, OZ will delete posts here mentioning non-sponsors, an odd if not unique policy
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
Post Reply
|
|
|