10-13-2011, 10:46 PM | #1 |
Wideband sensor
I am looking at getting a wideband O2 sensor for my Camaro. I have a full ARH exhaust headers to tailpipe. Do I need to add 2 sensors?
Also where do I put these in the car? the rear O2 sensors have been disabled, can I use the existing bungs?
__________________
2010 IOM SS - CAI, VMAX ported Throttlebody, ARH Longtubes to tailpipe Yank 3600SS Torque Converter, GPI SS4 VVT cam, Custom tune by Rhino79
|
|
10-13-2011, 10:48 PM | #2 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
you don't need to add the wideband sensors. If the rear O2 sensors were tuned out then you shouldn't need to worry. Also, wideband O2 sensors go before the cats (or so I believe).
|
10-13-2011, 11:17 PM | #3 |
I just noticed I added this to the Classified section instead of the proper location, Can a MOD please move this?
I am looking to add the wideband to start doing some tweaking with HP Tuners.
__________________
2010 IOM SS - CAI, VMAX ported Throttlebody, ARH Longtubes to tailpipe Yank 3600SS Torque Converter, GPI SS4 VVT cam, Custom tune by Rhino79
|
|
10-14-2011, 06:23 AM | #4 |
Drives: 67 Pro-Tourer, 12 SS Join Date: Aug 2011
Location: NJ
Posts: 254
|
There should be a bung before the cat. If not make one. You only need one as most widebands that we novices use only use one input. You can get a wideband that will read 2, or 8 for that matter but the one will suffice for what you are doing.After fighting with an LM1 I have been using AFX with good results. There are many out there. Blondes and redheads really.
|
|
|
|
|