04-20-2020, 12:23 AM | #1 |
Stigs Bahraini Cousin
|
O2 sensor question
One of my o2 sensors as acting weird, based on the live data which i shared with my tuner it's causing light misfire on bank 2 cylinders as it reads up to 10 count's and resets.
Was on rockauto looking for replacement but which one should i get NTK, Denso, Delphi or AC delco. Should i replace both or the defective one only? And if replacing one only is there any issue using two different "brands" since bank 1 will be Ac Delco i guess. OEM part# 12617332
__________________
2015 CAMARO 1LE
|
04-20-2020, 12:27 AM | #2 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
I always replace mine with Denso's and have had great luck. They are recommended to replace in pairs. I was told these are the actual factory parts, but I can't confirm that.
Denso 234-4669 https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
04-20-2020, 03:48 AM | #3 |
Account Suspended
|
Factory is A/C Delco.
|
04-20-2020, 05:15 AM | #4 |
Stigs Bahraini Cousin
|
Factory is around 70$ bosch, delphi and the rest are 35-45$
__________________
2015 CAMARO 1LE
|
|
|
|
|