Headers for Corsa Double Helix

Hambo864 · 03-07-2021, 06:11 PM

I have spent the entire weekend researching long tube headers in an attempt to find a set of headers that will bolt to the Corsa Double helix exhaust on my car. If anyone has dealt with this issue, I'm trying to figure out the easiest, most cost efficient decision. I'm not looking for a brand, I'm looking for fitment. Thank you

enzia35 · 03-07-2021, 07:31 PM

Any headers from a different brand will need some fitting.

Pens · 03-08-2021, 12:02 AM

I have the corsa x pipe and from what I understand you have to purchase the connection pipes from corsa to connect to headers. Now I’m not sure if that’s specific to the corsa headers only or to any headers.

Pens · 03-08-2021, 12:09 AM

Basically these corsa connection pipes should replace and connect to the areas circled black and the red circled area should connect to any headers. Someone correct me if I’m wrong cause I’m not 100%.

Hambo864 · 03-08-2021, 06:25 PM

Thank you Pens. That was exactly what I needed to see to help me out. I found some Corsa headers with the connectors but ultimately decided to go with a set of Kooks with their connection pipes. I know there will be some cutting and welding that I'll have to do but I'm just gonna deal with it.

Pens · 03-08-2021, 08:22 PM

No problem. I was going to start a thread asking the same question when the time comes to get headers as I already have the corsa x pipe and just purchased a kooks straight pipe (no mufflers) axle back. Let me know how the connection to the corsa x pipe works with the kooks setup when you get it on.

03-07-2021, 06:11 PM	#1
Hambo864 Drives: Chevrolet Camaro SS 1LE Join Date: Jun 2020 Location: Fort Rucker, AL Posts: 30 View My Garage	Headers for Corsa Double Helix I have spent the entire weekend researching long tube headers in an attempt to find a set of headers that will bolt to the Corsa Double helix exhaust on my car. If anyone has dealt with this issue, I'm trying to figure out the easiest, most cost efficient decision. I'm not looking for a brand, I'm looking for fitment. Thank you

03-07-2021, 07:31 PM	#2
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Any headers from a different brand will need some fitting. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

03-08-2021, 12:09 AM	#4
Pens Drives: 2019 SS 1LE Join Date: Apr 2020 Location: Staten Island Posts: 36	Basically these corsa connection pipes should replace and connect to the areas circled black and the red circled area should connect to any headers. Someone correct me if I’m wrong cause I’m not 100%. Attached Images

03-08-2021, 12:02 AM	#3
Pens Drives: 2019 SS 1LE Join Date: Apr 2020 Location: Staten Island Posts: 36	I have the corsa x pipe and from what I understand you have to purchase the connection pipes from corsa to connect to headers. Now I’m not sure if that’s specific to the corsa headers only or to any headers.

03-08-2021, 06:25 PM	#5
Hambo864 Drives: Chevrolet Camaro SS 1LE Join Date: Jun 2020 Location: Fort Rucker, AL Posts: 30 View My Garage	Thank you Pens. That was exactly what I needed to see to help me out. I found some Corsa headers with the connectors but ultimately decided to go with a set of Kooks with their connection pipes. I know there will be some cutting and welding that I'll have to do but I'm just gonna deal with it.

03-08-2021, 08:22 PM	#6
Pens Drives: 2019 SS 1LE Join Date: Apr 2020 Location: Staten Island Posts: 36	No problem. I was going to start a thread asking the same question when the time comes to get headers as I already have the corsa x pipe and just purchased a kooks straight pipe (no mufflers) axle back. Let me know how the connection to the corsa x pipe works with the kooks setup when you get it on.

User Name		Remember Me?
Password