06-09-2019, 09:54 AM | #1 | |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Wideband HPTuners problem
Hey guys, I made this video for Ted Jannetty to see if he can determine why my wideband is not talking to HPTuners. Ted and HPTuners initially thought the problem was with my gauge, but Ted replaced the gauge and nothing has changed. I'm new to HPTuners, so the issue may be on my end. I thought I would post the video here to see if anyone could help. I'm sure Ted will chime in tomorrow, but I thought I would post here to see if anyone on the forums could help.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
|
06-09-2019, 10:39 AM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Mine has been randomly doing the same thing but you might try this.
-Delete the current WB PID and disconnect HPT scanner. -Put the car in Accessory mode by holding the start button with foot off the brake for 5-10seconds. -After the wideband heats up and switches on, connect the HPT scanner. -Select Add Pid. -In search box type "Wideband" -AEM device should show up in external controllers. -Add that PID to the list, Start car, and Start scanning. This is the only way to get mine to work and it will be fine for 2-3 different logs then start acting up. My guess is a software glitch.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-09-2019, 11:32 AM | #3 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
You're the man, King! Worked like a charm!
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
06-09-2019, 05:53 PM | #4 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Glad to hear!
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-10-2019, 09:07 PM | #5 |
Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
|
Oh I was watching the video before I read further down that King figured it out. I was going to also suggest that you had to use the AEM specific PID and not just a Generic WB Ratio 1 selection.
__________________
Former Ride: 17 Camaro 2SS, M6 - Fifty | Procharger P1SC | 3.7 Pulley | Stage 2 IC | Race Bypass | DSX FF Kit | JRE Custom E85 Flex Fuel Tune | LT4 Fuel System | JMS Voltage Booster | MSD Plug Wires | American Racing 1-7/8's LT Headers Full System Catback | Baro Breakout Harness | LT4 Map Sensor | Katech Ported TB | MMS Oil Catch Can | 160 Thermo | Solo Performance J-Pipes
|
06-11-2019, 12:13 AM | #6 | |
Drives: 2016 2SS 8AT Join Date: May 2018
Location: Nevada
Posts: 358
|
Quote:
It used to work non stop Everytime. Now its hit or miss. Messed up a few logs I was taking because I didn't notice till after that it wasn't logging it. |
|
06-13-2019, 08:52 AM | #7 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Thanks for the help on this guys seems to be a new problem that cropped up recently.
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
06-13-2019, 09:38 AM | #8 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,092
|
Have you guys tried the "repoll for supported parameters" option?
if Wideband not reading. 1. click blue stop scanning 2. click on disconnect from vehicle 3. click connect to vehicle 4. click vehicle/Repoll For Supported Parameters
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
06-16-2019, 07:19 PM | #9 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
I had to use the repoll option, then used the WB EQ term in the channel list and it added the WB EQ just fine. Has worked that way since day 1.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp
2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD |
06-16-2019, 09:46 PM | #10 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Kings always showing off. Ha
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
|
|