[2010REDSS]

Originally Posted by FollowMyLine

Amazing time Todd! You are just pulling further and further away at Road America in the #1 spot. Unfortunately, I cannot make the Mid-Ohio trip this year, but I WILL be back at RA October 14/15. Hoping for some decent weather.

Hey Luan!

Now that I'm in the offseason.............finally getting some PDR videos watched and uploaded.

Here is the PDR from my PB run back in September. As the PDR is 4/100ths slower, please reset the laptime in the thread to 2:19:45

https://youtu.be/myviYN6HIrA?si=brtutb0OZBL_zAm8

I see time all over the place when I watch this.....so.....will be hunting 2:18's next spring!!

Hope to see you at RA then!

[FollowMyLine]

All times updated. Cleaned up the list a bit more as well.

[FollowMyLine]

Originally Posted by 2010REDSS

I see time all over the place when I watch this.....so.....will be hunting 2:18's next spring!!

Hope to see you at RA then!

Not that I am pushing you to do something you are not comfortable with, but I am taking The Kink slightly faster than you are and I am on Stock SC3's. There is for SURE at least 2-3 thenth's of a second there to be gained there.

[2010REDSS]

Originally Posted by FollowMyLine

Not that I am pushing you to do something you are not comfortable with, but I am taking The Kink slightly faster than you are and I am on Stock SC3's. There is for SURE at least 2-3 thenth's of a second there to be gained there.

Yup! Totally agree. I've taken it thru there faster at times...and need to get back to doing that constantly.

[Dabjbr]

So does a 1:22.87 beat an undocumented 1:22.8x? If so, put me down for 4th place! Haha

Finally beat my last PB by over a second and got into the 22’s which is pretty respectable if I don’t say so myself!

Thunderhill Raceway West Willows Ca
1:22.87 Dabjbr in '20 SS 1LE on 11/12/23, Nankang AR1 305/30/19 square, DTC60, Castrol SRF, -2.6f -1.7r, Zero Toe

[tomster]

Originally Posted by FollowMyLine

Not that I am pushing you to do something you are not comfortable with, but I am taking The Kink slightly faster than you are and I am on Stock SC3's. There is for SURE at least 2-3 thenth's of a second there to be gained there.

Easy now we all saw your "Kink" video LOL

boy that sounded bad...

[BooBerry1LE]

Circuit of the Americas
2:20.39
2019 ZL1 1LE A10
11/19/2023
Tires = michelin/pirelli Scrubs
Mods = AP Front Brakes, SPL suspension, heads/cam/ported blower, E85, splitter/diffuser/ 9L wing.



https://www.youtube.com/watch?featur...&v=q_xjGwcVIFg

[Oldslowtired]

VIR full course
159.52
2020 ZL1 !LE
tires R7s
mods, AP brakes, rotofab intake, AWE cat back, SLP rear toe arms, ARP wing, AeroSportsConcepts splitter, BC forged Wheels,

https://youtu.be/Bb8B_RIik2w?si=3YlAXAYGevMoDKKH

[FollowMyLine]

Originally Posted by tomster

Easy now we all saw your "Kink" video LOL

boy that sounded bad...

[FollowMyLine]

All times updated.

[RoaringV8]

Track = NJMP Lightning
Elapsed Time = 1:12.50
Year / Model / Trim / Transmission = 2017 SS 1LE
Date = 10/28/2023
Tires = GY SC3R (305/30/19)
Mods = Tuned with LT2 Intake, Roto-Fab CAI, Flex Fuel 19x11 wheels on 305/30/19 Square GY SC3R's, EBC SR11 Brake Pads in front; Raybestos ST43 Rear, Stainless Steel brake lines, SPL Rear Lower Control Arms w/ Eccentric Lockout, SPL Rear Toe Arms w/ Eccentric Lockout, Vorshlag Camber Plates -3.2 Front Camber -2.0 Rear Camber


Fastest lap starts around 9:50

[Christian1LE]

Track = Road Atlanta
Elapsed Time = 1:33.061
Year / Model / Trim / Transmission = 2022 / SS / 1LE / Manual
Date = 12/03/23
Tires = Hoosiers A7 315/30/18
Mods = Hawk60, camber plates, spl semi trailing arms, BMR toe rod.

[khcoaching]

Originally Posted by Christian1LE

Track = Road Atlanta
Elapsed Time = 1:33.061
Year / Model / Trim / Transmission = 2022 / SS / 1LE / Manual
Date = 12/03/23
Tires = Hoosiers A7 315/30/18
Mods = Hawk60, camber plates, spl semi trailing arms, BMR toe rod.

Nice lap!

[Christian1LE]

Originally Posted by khcoaching

Nice lap!

Thank you, unfortunately I can't run Hoosier A7's anymore until I make the suspension stiffer, the car can't handle the higher G's from the A7's and it's leaning too much. It started cutting into my tires on the outside edges and on the inside edges. Rubbing the fender on the outside and I have to lift the car up today to figure out what could have possibly cut the inside of the tire. Luckily no puncture.

I might just go with the ZLE suspension, need to find someone who has done it before to see if it's a good solution.