New bumper - Page 25 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pagliaro · 07-11-2019, 06:10 AM

Quote:

Originally Posted by mbrinker96

For the belly pan I was thinking about getting a thin aluminum diamond plated sheet and cutting that to fit. Should help with stability and have little flexibility if something hits it so it won't crack. I'm thinking about going the same way and using a few metal bars as well to help hold it up.

Something I noticed about my bumper is that it does sag down and create a gap between the top front and the hood. If I pull and lift it up the gap goes away. So hopefully this fixes it, if not I'll have to look into somehow bolting the top of the bumper up a little more since the plastic rivets aren't doing the best job.

On the bright side, I should get it back from the painter this Saturday.

Yes my bars fixed that sag. Still slight gap and really notice the lines being off. I have to add spacers to close the gap more. It really is just a small portion once bumper is in correct place. Smaller than Ikons original which I think extends past the crash bar quite a bit. Oem stopped near the front of the crash bar.

Good Idea on thd Diamond pattern sheet may steal that.

Here is my hood. Debating on insert gloss black and hood Synergy Green without stripes, or getti g stripes painted on.

KJZ28 · 07-11-2019, 01:33 PM

Your car looks crazy good!

orange devil · 07-11-2019, 01:39 PM

It will definitely look good either way

Pagliaro · 07-11-2019, 01:44 PM

Starters will be no stripes so I can get the feel for it.

Pagliaro · 07-11-2019, 01:46 PM

Quote:

Originally Posted by Elvis66

It will definitely look good either way

Did you also trade mustang ? As now are both listed as 2019s and are both orange.

orange devil · 07-11-2019, 01:56 PM

Quote:

Originally Posted by Pagliaro

Did you also trade mustang ? As now are both listed as 2019s and are both orange.

I have both .. so the Mustang reminds me I'm one of the old original colors just like the crush orange does.

Pagliaro · 07-11-2019, 09:17 PM

Quote:

Originally Posted by Elvis66

I have both .. so the Mustang reminds me I'm one of the old original colors just like the crush orange does.

Thought your stang was white or silver when you had silver camaro.

orange devil · 07-12-2019, 12:52 AM

Quote:

Originally Posted by Pagliaro

Thought your stang was white or silver when you had silver camaro.

I had a 2015 white mustang Eco boost before my 19 mustang

Pagliaro · 07-12-2019, 07:20 AM

Quote:

Originally Posted by Elvis66

I had a 2015 white mustang Eco boost before my 19 mustang

Your rides are sweet.

mbrinker96 · 07-12-2019, 12:05 PM

Very good news regarding the air dam/belly pan. I asked Next Gen if it's a possibility to receive one once Ikon adds them again. They just replied saying that Ikon has found a partner and is getting new ones in. They are currently working on getting it sent to me. Hopefully you can also message whomever you bought yours from and see if that's a possibility.

The only thing now is to buy the bolts that were on the stock under pan, I doubt the new belly pan comes with any. Majority of mine ripped out after not being able to dodge a blown up tire on the highway so it hit my lower splitter and ripped a lot of them out. That and I have no clue where the center bolts are.

orange devil · 07-12-2019, 12:51 PM

Quote:

Originally Posted by Pagliaro

Your rides are sweet.

Thank you !! I miss my 14 Camaro ..she was so beautiful

mbrinker96 · 07-12-2019, 01:06 PM

Quote:

Originally Posted by Elvis66

Thank you !! I miss my 14 Camaro ..she was so beautiful

Surprised you let it go after all that work, but a 19 ss is a sweet upgrade. Also noticed that Ikon updated their ebay pictures with the ones you took. They look so much better than the ones they were using before!

orange devil · 07-12-2019, 01:13 PM

Quote:

Originally Posted by mbrinker96

Surprised you let it go after all that work, but a 19 ss is a sweet upgrade. Also noticed that Ikon updated their ebay pictures with the ones you took. They look so much better than the ones they were using before!

For real? Could you send me the pictures.

mbrinker96 · 07-12-2019, 01:30 PM

Quote:

Originally Posted by Elvis66

For real? Could you send me the pictures.

Sure! They're directly from the product page on eBay.

07-11-2019, 01:33 PM	#338
KJZ28 Drives: 2018 Buick Regal TourX Join Date: Aug 2015 Location: North of NYC Posts: 546 View My Garage	Your car looks crazy good! __________________ SOLD: 2010 2SS/RS L99-A6 K&N CAI, Speed Engineering Long Tube Headers, Stainless Works hi-flow cats, Flowmaster American Thunder Cat-back. Tuned by Corvettes of Westchester. 1/LE rear suspension conversion, Bilstein B6 Stuts/shocks.

07-11-2019, 01:44 PM	#340
Pagliaro RIP Betsy ( Vitara ) Drives: '11 SGM 1LT/RS Join Date: Oct 2012 Location: Ottawa, Ontario Posts: 1,178	Starters will be no stripes so I can get the feel for it. __________________ First retrofitted 2014 mylink.

07-11-2019, 01:39 PM	#339
orange devil Account Suspended Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017 Location: California Posts: 1,694	It will definitely look good either way

07-12-2019, 12:05 PM	#346
mbrinker96 Drives: 2014 Camaro LS Join Date: Sep 2018 Location: Indianapolis Posts: 41	Very good news regarding the air dam/belly pan. I asked Next Gen if it's a possibility to receive one once Ikon adds them again. They just replied saying that Ikon has found a partner and is getting new ones in. They are currently working on getting it sent to me. Hopefully you can also message whomever you bought yours from and see if that's a possibility. The only thing now is to buy the bolts that were on the stock under pan, I doubt the new belly pan comes with any. Majority of mine ripped out after not being able to dodge a blown up tire on the highway so it hit my lower splitter and ripped a lot of them out. That and I have no clue where the center bolts are.