12-14-2016, 04:48 AM | #15 |
Drives: 2016 Red Hot 2SS Join Date: May 2016
Location: MA
Posts: 486
|
Glen, have you considered putting a patch of protection film there? My guy did it without me asking for it at no extra cost, in his experience that spot (and the door handle area) is most prone to scratches from normal use.
|
12-14-2016, 05:17 AM | #16 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
I have done that in the past,works well.
|
12-14-2016, 05:54 AM | #17 |
Drives: 2002 Camaro SS Join Date: Jun 2012
Location: Evansville, Indiana
Posts: 526
|
Glen, can you give some more details about using alcohol to remove the polish?
|
12-14-2016, 06:22 AM | #18 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Pretty much just as it says above. Get a spray bottle ,mix it up 25% rubbing alcohol 75% water, spray the polish after it hazes off, and wipe it off with a microfiber. To detailers, this is known as IPA. IPA is the absolute best way to prep a paint service for any sealant or coating.
|
12-14-2016, 07:47 AM | #19 |
Drives: 2017 camaro SS blue w/white stripes Join Date: Nov 2016
Location: bowling green/louisville ky
Posts: 134
|
what if you have stripes? can you polish ,let haze then spray and wipe off? or just don't polish the stripe? only polish the paint...?
|
12-14-2016, 07:49 AM | #20 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
In general, never polish soft stuff like stripes or paint film.....
|
12-14-2016, 12:23 PM | #21 |
Drives: 2017 camaro SS blue w/white stripes Join Date: Nov 2016
Location: bowling green/louisville ky
Posts: 134
|
|
12-19-2016, 09:46 AM | #22 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
|
|
|
Post Reply
|
|
|