09-17-2019, 09:02 PM | #1 |
Drives: 19 SS 1LE Join Date: Sep 2019
Location: Central Coast, CA
Posts: 47
|
GEN 5 2019 Radar Harness
I have been looking at hard wiring a Uniden R3 into my 19 SS1LE using the GEN 5 DIY radar harness. But looking at the picture I have a different mirror. My Onstar and emergency buttons are in the trim overhead, and my rearview mirror is a basic manual dimming mirror. In the picture on the website the Onstar and emergency buttons are in the mirror itself. I am just wondering where I would plug the harness into? Will I have to pull the overhead trim out and plug it in there?
https://www.gen5diy.com/collections/...tector-harness |
09-18-2019, 01:08 AM | #2 |
Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019
Location: San Diego
Posts: 207
|
Did you watch the bottom video, you just linked above?
Yes, it'll work, and they walk you through the process. Looks pretty straight forward.
__________________
2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.
|
09-18-2019, 08:10 PM | #3 |
Drives: 19 SS 1LE Join Date: Sep 2019
Location: Central Coast, CA
Posts: 47
|
Actually no I didnt watch the video until now. I made the post while I was at work, I was unable to watch it. But thank you I watched it and does seem straight forward.
|
|
|
Post Reply
|
|
|