01-14-2021, 06:06 PM | #1 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
* PIC REQUEST * Crush w/ aftermarket wheels
If you have an Orange 6th Gen with aftermarket wheels, please post up a couple pictures! Hoping there is a small variety of finish colors out there to get an idea from! Considering what color to order a set of track wheels for my Crush ZLE in.
Thanks! |
01-14-2021, 06:07 PM | #2 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
Or links to any high quality imagine generators on wheel manufacturers websites that include an orange 6th Gen would also be great! (If such a tool exists!)
|
01-14-2021, 06:14 PM | #3 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,800
|
i just googled it and i didnt see anything maybe check with forgeline or hre wheels or ccw or bc forged but i dont see anything when i search it
what wheels are you thinking btw?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-14-2021, 06:30 PM | #4 |
50th Anniversary Vert
|
Not sure if this helps, but this is Gloss Fiery Orange with MRR gunmetal wheels.
__________________
|
01-14-2021, 07:08 PM | #5 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,490
|
Absolutely amazing car, congrats , although these wheels might as well be the OEM 1LE ones. You did the dual color theme very tastefully, it's so good I all but want to jump into your car and drive off into the sunset.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-14-2021, 09:08 PM | #6 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
Not 100% sure yet. Likely forgestar CF5V as I can get great pricing on them, although I’d love a little assurance from them about handling a 3850lb car on track (they’ve been great on my 2800lb C5). Also considering Apex. Or even another set of OEM.
|
01-14-2021, 09:28 PM | #7 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,059
|
Orange
I know it’s a 5th Gen but you get the idea with orange an gunmetal wheel.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
Post Reply
|
Thread Tools | |
|
|