What did you do to your 6th Gen Camaro today?! - Page 224

SanDMaN2091 · 05-17-2017, 10:27 AM

Quote:

Originally Posted by gpskinzhut

Took her to work. I was going to let it sit and take the IROC in but I usually sit in my car for lunch so people don't bother me. Sitting in the IROC with the T-tops and that big hatch is like sitting in a greenhouse. I can't do it for more than 10 minutes in direct sunlight without wanting to die. I really have to look at some ceramic tint and t-roof shades. Jesus-H. I remember back in the day when I had my '82 T/A. I left some cassette tapes in a rack under the rear hatch on a hot day. The tapes melted and warped to hell.

3rd gen +1....the one i fell in love with...

Eric SS · 05-17-2017, 11:37 AM

BMR lowering springs

gpskinzhut · 05-17-2017, 12:56 PM

Quote:

Originally Posted by SanDMaN2091

3rd gen +1....the one i fell in love with...

Indeed! As nice as my '87 is, I took the AC out to clean up the engine bay. 7 years later I'm starting to regret it lol

camaromike77 · 05-17-2017, 01:47 PM

Quote:

Originally Posted by Corner carver

Sat in it as I was given my first speeding ticket heading to work...

.....That's not a good feeling.....

Skyset · 05-17-2017, 07:19 PM

Got my car back after getting paint protection film (3m) installed on the bumper, hood, fenders, mirrors, headlights

Cupahaters · 05-17-2017, 07:21 PM

Installed the chevy (oem) illuminated bow tie in the front and it is not very bright. Almost looks like it's not on. It's not night yet but seems very low compared to all the pictures. Lights on running lights don't matter it's very dim. Any ideas. Did you guys install them just like instructions said.

Thanks

foundcamarolifeisgood · 05-17-2017, 08:55 PM

Quote:

Originally Posted by Cupahaters

Installed the chevy (oem) illuminated bow tie in the front and it is not very bright. Almost looks like it's not on. It's not night yet but seems very low compared to all the pictures. Lights on running lights don't matter it's very dim. Any ideas. Did you guys install them just like instructions said.

Thanks

mine was dealer installed with similar outcome

TenSeven · 05-17-2017, 09:32 PM

I've finally had enough of those Nitto NT05 tires screaming at me all the time, soooo...

What a VAST improvement. But it seems the PS4Ss run a little narrower that the N05s, I might have been able to get a 315 in the back. Close enough.

AlphaCamaro7 · 05-17-2017, 11:20 PM

Was driving home from practice and a 2016 mustang GT wanted to go so we got 3 pulls in. first two were 0-80 from the red light and the 3rd pull was me chasing from behind and I was able to win all 3. Pretty amazed how our 6th gens perform, and how I was able to handle the GT

Sent from my iPhone using Tapatalk

SanDMaN2091 · 05-18-2017, 06:49 AM

Quote:

Originally Posted by AlphaCamaro7

Was driving home from practice and a 2016 mustang GT wanted to go so we got 3 pulls in. first two were 0-80 from the red light and the 3rd pull was me chasing from behind and I was able to win all 3. Pretty amazed how our 6th gens perform, and how I was able to handle the GT

Sent from my iPhone using Tapatalk

+1

RicSimonis · 05-18-2017, 03:27 PM

Quote:

Originally Posted by Cupahaters

Installed the chevy (oem) illuminated bow tie in the front and it is not very bright. Almost looks like it's not on. It's not night yet but seems very low compared to all the pictures. Lights on running lights don't matter it's very dim. Any ideas. Did you guys install them just like instructions said.

Thanks

Quote:

Originally Posted by foundcamarolifeisgood

mine was dealer installed with similar outcome

Yup, same here. It's a DOT requirement that it can't be over a certain brightness (not sure on the exact reference). It will show up better at night, it just won't be blinding.

Regardless, congrats.

Android42019 · 05-18-2017, 11:13 PM

New Valve Caps

ex-SS-ve · 05-18-2017, 11:32 PM

Installed the gm "dark taillamps", lit sill plates, gm suede console and door pads, and removed that terrible SS emblem off the rear bumper..

Dave66 · 05-19-2017, 01:10 PM

Hi camaro6 forum, first post!

Thanks for all the info on here it helped me make my decision to get my V6 a couple months ago.

Wanted black wheels but my car came with painted 18" ones, so I Plasti-Dipped them on Monday:

05-17-2017, 11:37 AM	#3124
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	BMR lowering springs Attached Images

05-17-2017, 07:19 PM	#3127
Skyset Drives: 2017 Camaro 2SS Coupe Join Date: May 2010 Location: Mississauga, Ontario Posts: 358	Got my car back after getting paint protection film (3m) installed on the bumper, hood, fenders, mirrors, headlights Attached Images

05-17-2017, 11:20 PM	#3131
AlphaCamaro7 Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016 Location: Springfield,VA Posts: 884 View My Garage	What did you do to your 6th Gen Camaro today?! Was driving home from practice and a 2016 mustang GT wanted to go so we got 3 pulls in. first two were 0-80 from the red light and the 3rd pull was me chasing from behind and I was able to win all 3. Pretty amazed how our 6th gens perform, and how I was able to handle the GT Sent from my iPhone using Tapatalk __________________ Well............ At least you tried. lol

05-18-2017, 11:13 PM	#3134
Android42019 The Black Emerald Drives: '17 ZL1, '08 Trailblazer, '11 1LTRS Join Date: Sep 2011 Location: DFW Metroplex Posts: 781 View My Garage	New Valve Caps Attached Images __________________

05-19-2017, 01:10 PM	#3136
Dave66 Drives: 2017 1LT V6 M6 Garnet Red Join Date: May 2017 Location: Frederick, Maryland Posts: 6	Hi camaro6 forum, first post! Thanks for all the info on here it helped me make my decision to get my V6 a couple months ago. Wanted black wheels but my car came with painted 18" ones, so I Plasti-Dipped them on Monday: Attached Images

05-17-2017, 07:21 PM	#3128
Cupahaters Drives: 2017 fifty camaro Join Date: May 2017 Location: Frisco Posts: 247	Installed the chevy (oem) illuminated bow tie in the front and it is not very bright. Almost looks like it's not on. It's not night yet but seems very low compared to all the pictures. Lights on running lights don't matter it's very dim. Any ideas. Did you guys install them just like instructions said. Thanks

05-17-2017, 09:32 PM	#3130
TenSeven Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Huntington Beach, CA Posts: 299 View My Garage	I've finally had enough of those Nitto NT05 tires screaming at me all the time, soooo... What a VAST improvement. But it seems the PS4Ss run a little narrower that the N05s, I might have been able to get a 315 in the back. Close enough.

05-18-2017, 11:32 PM	#3135
ex-SS-ve Join Date: Feb 2010 Location: Houston, Texas Posts: 763	Installed the gm "dark taillamps", lit sill plates, gm suede console and door pads, and removed that terrible SS emblem off the rear bumper..

User Name		Remember Me?
Password