Where the heck can I buy Carbon Fiber interior pieces????

[Big C CamaroSS]

I have been searching & searching for 2 specific carbon fiber pieces.......the trim piece around the speedo/tach and the trim piece around the shifter (its usually called a 4 gauge cluster......it has the shift pattern on it). I have already spoken with Indpower, but unfortunately he only carries the 4 gauge cluster piece. I want to buy both from the same place so they match 100%. I'm swapping out my gray door & dash trim pieces and putting in IOM (matches the exterior) and to finish off the interior I HOPE to get the 2 carbon fiber pieces. I PM'd Fesler, but I haven't heard back. That kind of customer service makes me leary! Can someone point me in the right direction? I'd even take very high quality hydro-carbon at this point. I finally decided what I wanted to do, and now I'm having trouble making it happen. Help please:(

[DraggnFrameGMC]

B&I Trim has a full 41 piece kit that includes the pieces youre inquiring about. I dont know if they will sell individual pieces but it never hurts to ask.

[Mindz]

Do you want actual carbon fiber pieces or the hydro-dip plastic stuff?

[The Stig]

I'd shoot indopwr a PM. He sells those pieces, and I will gladly vouch for his/DSVs work.

[dragonZ28]

We have done both of those in the hydro work.
Please let me know if you are intertested.

[Hennesseyrgv]

Originally Posted by Big C CamaroSS

I have been searching & searching for 2 specific carbon fiber pieces.......the trim piece around the speedo/tach and the trim piece around the shifter (its usually called a 4 gauge cluster......it has the shift pattern on it). I have already spoken with Indpower, but unfortunately he only carries the 4 gauge cluster piece. I want to buy both from the same place so they match 100%. I'm swapping out my gray door & dash trim pieces and putting in IOM (matches the exterior) and to finish off the interior I HOPE to get the 2 carbon fiber pieces. I PM'd Fesler, but I haven't heard back. That kind of customer service makes me leary! Can someone point me in the right direction? I'd even take very high quality hydro-carbon at this point. I finally decided what I wanted to do, and now I'm having trouble making it happen. Help please:(

There's this guy that does carbon fiber everything for your car , here's his phone number his Name is Tony , he is actualy working on my car, doing some hand made carbon fiber pieces. His shop is in Brownsville tx. Actually those parts that your talking about he did already for me last year. (956)524-0054. I can post some of my pics by the end of the week as soon as I get my car back. Thanks. I know for a fact other companies order their pieces from china!

[Big C CamaroSS]

Thanks everyone. I think it would look better if the pieces were real carbon fiber. Indpower doesn't have the speedo/tach trim piece or I'd order from him in a heartbeat!! Hennesseyrgv...I have heard about the guy you're using and he seems to change names/addresses like the wind. He was a vender here, but not any more. Too sketchy for me & my money.....too bad because I've seen his work.....BEAUTIFUL!!!!!!!

[Hennesseyrgv]

Originally Posted by Big C CamaroSS

Thanks everyone. I think it would look better if the pieces were real carbon fiber. Indpower doesn't have the speedo/tach trim piece or I'd order from him in a heartbeat!! Hennesseyrgv...I have heard about the guy you're using and he seems to change names/addresses like the wind. He was a vender here, but not any more. Too sketchy for me & my money.....too bad because I've seen his work.....BEAUTIFUL!!!!!!!

I remember ' the carbon fiber specialist was the people he would do the parts for , and the carbon fiber specialist would turn around and sell them as if they did the work, in reality the one with the talent is this guy tony and not the middle man " the carbon fiber specialist" in this case it was a female that own the so called carbon fiber specialist. Her name was pricila, any ways this same reason now that I am going directly with the guy that's actually doing the work , the parts are less expensive and I am not paying the middle man no more. It's hard to find some one with this talent. 'I found him' . Me too I wouldnt just trust any body with my money or my baby "camaro".

[35th02ss]

Hennessey do you have pics of his work?

[Hot Lava]

Fesler sells those pieces I am pretty sure. I know they have an entire Carbon fiber interior kit.

http://www.feslerbuilt.com/2010feslermosscamaro.html

[Hennesseyrgv]

Originally Posted by 35th02ss

Hennessey do you have pics of his work?

I don't rigth now ,since he has my car ,but as soon as he is done , thinking this weekend I will post all of my pics. This guy does some bad ass work, he made my rear quarter panel in carbon fiber making look some thing like the Audi R8. Stay tune for those pics.

[Hennesseyrgv]

Originally Posted by 35th02ss

Hennessey do you have pics of his work?

i was near the shop and i stoped to take some pics. now they are working on my dash, i cant realesed this pics yet due to this new idea. i will post new pics once the car is out and washed. some of the pics that you will see arent presentable, i just took some quick shots.
























now remember my car is all durty and dusty since its not ready yet. i will post all the car with the new project this coming week. stay tune.

[Big Rob]

Originally Posted by Big C CamaroSS

I have been searching & searching for 2 specific carbon fiber pieces.......the trim piece around the speedo/tach and the trim piece around the shifter (its usually called a 4 gauge cluster......it has the shift pattern on it). I have already spoken with Indpower, but unfortunately he only carries the 4 gauge cluster piece. I want to buy both from the same place so they match 100%. I'm swapping out my gray door & dash trim pieces and putting in IOM (matches the exterior) and to finish off the interior I HOPE to get the 2 carbon fiber pieces. I PM'd Fesler, but I haven't heard back. That kind of customer service makes me leary! Can someone point me in the right direction? I'd even take very high quality hydro-carbon at this point. I finally decided what I wanted to do, and now I'm having trouble making it happen. Help please:(

PM sent. Sorry for the delay. You can call me at the shop if you have any more questions.

Rob
480-748-2000

[Hennesseyrgv]

Originally Posted by Big C CamaroSS

I have been searching & searching for 2 specific carbon fiber pieces.......the trim piece around the speedo/tach and the trim piece around the shifter (its usually called a 4 gauge cluster......it has the shift pattern on it). I have already spoken with Indpower, but unfortunately he only carries the 4 gauge cluster piece. I want to buy both from the same place so they match 100%. I'm swapping out my gray door & dash trim pieces and putting in IOM (matches the exterior) and to finish off the interior I HOPE to get the 2 carbon fiber pieces. I PM'd Fesler, but I haven't heard back. That kind of customer service makes me leary! Can someone point me in the right direction? I'd even take very high quality hydro-carbon at this point. I finally decided what I wanted to do, and now I'm having trouble making it happen. Help please:(

Here's a link , you will find a pic. Of this car at the transformers 3 viewing in san Antonio tx. http://www.camaro5.com/forums/showth...128072&page=13