04-29-2018, 08:40 AM | #1 |
Bannable
|
Removing sound dampener from SC lid
Who here has actually removed it? I am curious how it is attached as I plan on removing mine this coming weekend. Didn't want to get balls deep in it only to find out I was missing a needed tool. Thanks
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
04-29-2018, 08:59 AM | #2 |
Drives: None Join Date: May 2017
Location: Chicago, IL
Posts: 462
|
There are just 5 x Torx 20 screws holding the plate to the lid, so that and a rag to wipe off the little bit of oil you'll have under there.
|
04-29-2018, 09:04 AM | #3 |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
Does it make that big of difference? Also, easy to put back on if you change your mind after?
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
04-29-2018, 09:19 AM | #4 | |
Drives: None Join Date: May 2017
Location: Chicago, IL
Posts: 462
|
Quote:
It's easy enough to put back on, but it's not worth it. There are a lot of lid bolts, and the more you monkey with it, the greater the reason you should replace the lid gasket. Plus, the lid is sharp in places, so please use a rag and be careful handling it. |
|
04-29-2018, 09:34 AM | #5 | |
Drives: 2017 ZL1,2013 ZR1, 1952 C3100 Resto Join Date: Jun 2017
Location: Gibsonton, Fl
Posts: 168
|
Quote:
__________________
2017 ZL1,Mosaic Black, auto,nav/pdr, Roto Fab,Mamo
2013 ZR1 60th Anniv. 1952 C3100 resto-rod. LS6, 4L60e, 228R cam |
|
04-29-2018, 10:44 AM | #6 |
Drives: 2019 Jeep Rubicon Sold:2017 ZL1 A10 Join Date: Feb 2017
Location: Scappoose, OR
Posts: 560
|
Check out this thread, Gets a little off topic by the end. I ended up going to the NX Lid.
https://www.camaro6.com/forums/showthread.php?t=522768
__________________
Travis
SOLD ZL1 Summit White, A10, Black Strip, PDR, ZL1 floor mats Ordered 2/11, 2000 2/14, 3000 2/20, 3100 2/24, 3300 3/7, 3400 3/8, 4300 3/16, 4B00 3/21 Bayed at train yard in Ohio, 4200 3/26 All Abroad for the West Coast, 4800 4/4 Deliverd to portland train yard, 5000 4/7 3:00AM Deliverd to Dealer, 6000 4/7 6:45PM Delivered to Customer |
04-29-2018, 11:01 AM | #7 |
Drives: 2013 Cayenne GTS Join Date: Dec 2013
Location: Scottsdale AZ
Posts: 338
|
It makes zero difference but remember to put it back when u wash it
|
04-29-2018, 11:06 AM | #8 |
Bannable
|
huh?....
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
04-29-2018, 11:08 AM | #9 |
Drives: None Join Date: May 2017
Location: Chicago, IL
Posts: 462
|
|
04-29-2018, 02:00 PM | #10 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
I've done it. Not drastically different but it was worth it for the effort.
Next stop, new S/C lid... |
04-29-2018, 06:04 PM | #11 |
Drives: 2019 Jeep Rubicon Sold:2017 ZL1 A10 Join Date: Feb 2017
Location: Scappoose, OR
Posts: 560
|
I highly recommend it!!!
__________________
Travis
SOLD ZL1 Summit White, A10, Black Strip, PDR, ZL1 floor mats Ordered 2/11, 2000 2/14, 3000 2/20, 3100 2/24, 3300 3/7, 3400 3/8, 4300 3/16, 4B00 3/21 Bayed at train yard in Ohio, 4200 3/26 All Abroad for the West Coast, 4800 4/4 Deliverd to portland train yard, 5000 4/7 3:00AM Deliverd to Dealer, 6000 4/7 6:45PM Delivered to Customer |
04-29-2018, 07:00 PM | #12 | |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Quote:
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
|
04-29-2018, 07:15 PM | #13 |
Drives: 2019 Jeep Rubicon Sold:2017 ZL1 A10 Join Date: Feb 2017
Location: Scappoose, OR
Posts: 560
|
Car is at the detail shop getting ready for summer. When I get it back I will post a PDR with the new lid and one with the dampener removed. Huge difference. If you don't like whine then don't buy the NX Lid
__________________
Travis
SOLD ZL1 Summit White, A10, Black Strip, PDR, ZL1 floor mats Ordered 2/11, 2000 2/14, 3000 2/20, 3100 2/24, 3300 3/7, 3400 3/8, 4300 3/16, 4B00 3/21 Bayed at train yard in Ohio, 4200 3/26 All Abroad for the West Coast, 4800 4/4 Deliverd to portland train yard, 5000 4/7 3:00AM Deliverd to Dealer, 6000 4/7 6:45PM Delivered to Customer |
04-29-2018, 07:20 PM | #14 | |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Quote:
Factory painted? It looks like a heck of a lot more than a blower lid going on there.
__________________
2018 ZL1 1LE sw/PDR
|
|
|
|
Post Reply
|
|
|