05-08-2020, 07:13 PM | #1 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
First Mods
Just picked up a 2017 non 1le car. Bone stock 3k miles. Six speed Ordering roto fab Cai . My question is headers Kooks or ARH and would my LT4 benefit most from 1 7/8 or 2 ". Thanks
|
05-08-2020, 07:18 PM | #2 |
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
Both ARH and Kooks make quality headers. I have Kooks 1 7/8 headers and they serve me just fine. From what I was told is that you don't need 2" headers unless you really plan to build out your car to 800wrhp or more
|
05-09-2020, 05:16 AM | #3 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
Any difference in fitment between the two brands of headers ?
|
05-09-2020, 05:48 AM | #4 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
Doubtful. Both are the highest quality LTs for our Camaros. I have the ARH 2 inch LTs and the fit was no problem. No rubbing, clearances are fine.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
05-09-2020, 05:58 AM | #5 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
Great input. Thanks
|
05-09-2020, 09:40 AM | #6 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I have Kooks 2”. Love them. I went this route so that if I ever wanted to go big on power I would have to switch from the 1 7/8”.
Be careful modding. Power is addicting. |
05-09-2020, 12:49 PM | #7 |
Drives: 2018 ZL1 Join Date: Oct 2019
Location: Texas
Posts: 83
|
Save some money and get the Texas Speed headers. Fit great and same performance gain.
__________________
2018 ZL1 A10 - Rotofab Intake, LT5 TB, TSP Headers, ATI Balancer, 9.1 Lower Pulley, JMS BAP, Flex Fuel.
|
|
|
Post Reply
|
|
|