03-16-2019, 05:00 PM | #1 |
Drives: 2106 Camaro SS M6 Join Date: Feb 2019
Location: NORTH CAROLINA
Posts: 5
|
2016 SS M6 emission help
2016 Camaro M6 with MSD,Cam,LT,Cats,Flex,Roto Fab trying to pass OBD2 can't get all monitors into readiness state. Tuner is scratching his head also. Anyone have any ideas on what to do in HP tuners. Car is failing EGR flow,Fuel system performance,O2 sensors. Been doing drive cycles with no success. Thanks for the help.
|
03-17-2019, 02:41 AM | #2 |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
From what I recall, mine took 500 miles and various driving cycles to show ready.
|
03-22-2019, 01:35 PM | #3 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Quote:
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
04-01-2019, 07:45 PM | #4 |
Drives: 2106 Camaro SS M6 Join Date: Feb 2019
Location: NORTH CAROLINA
Posts: 5
|
No it's not. Also has morel lifters. Here is the list of mods
MSD and Tick 95mm TB Hooker 1 7/8" Headers Hooker X Pipe Corsa Mufflers Roto-Fab Cold air intake Tick Performance Polluter Cam Tick performance AFM delete ARP Head Studs Morel Lifters Tick Performance Spring Kit Ti Retainers |
04-02-2019, 07:23 AM | #5 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
|
Quote:
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
04-02-2019, 04:10 PM | #6 |
Drives: 2106 Camaro SS M6 Join Date: Feb 2019
Location: NORTH CAROLINA
Posts: 5
|
|
04-18-2019, 01:06 AM | #7 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
doesnt that stuff need to be turned off in the tune so it doesnt read that stuff on a readiness test. hes talking about the car not finishing the emissions readiness test not a sniffer test. you have to drive it in certain ways to complete the test. http://www.obdii.com/drivecycle.html if you dont do all of this it will never set. I found this out after 3 tanks of gas after a tune once. Still didnt complete. My inspector told me about this.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
|
|
Post Reply
|
|
|