02-19-2019, 04:30 AM | #1 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Zl1 cradle fit the SS?
I was wanting to know will a complete zl1 cradle fit the SS both are M6. What would be the differences or to make it work. I tried to look for a similar post but no luck.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
02-19-2019, 09:17 AM | #2 |
Hot Dog
Drives: '17 1SS 1LE Join Date: Feb 2016
Location: Metro Detroit
Posts: 1,937
|
Rear cradle? What diff? Keep in mind the ZL1 = SS 1LE in this area, apart from the halfshafts.
__________________
2017 "M1SS1LE" in Hyper Blue w/PDR
|
02-19-2019, 09:54 AM | #3 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Yes rear.. maybe just the diff, axles, and drive shaft then..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
03-05-2019, 11:40 PM | #4 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
the ediff in the ZL1 and 1le wont work in a non ediff car. the cradle will bolt in but the it will be a open diff. cant make it work.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
01-12-2023, 07:43 PM | #5 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,320
|
it a bummer that this won't work I believe the ediff control module is actually on the rear subframe, it just can't talk to the bus without GM magic. I guess it would "work" if there is an aftermarket Torsen diff...
Clearly the controller can be flashed: https://gmauthority.com/blog/2018/07...sh-for-ss-1le/
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
Post Reply
|
|
|