Bumper adjustment bolts

atx_traveler · 08-03-2018, 08:45 PM

Hi,

I'm trying to get the bumper and hood fitment perfect. I came across this blog post: https://sandyblogs.com/techlink/?p=5622 but I realized my bolts don't have any (or very little) loctite on them. Is it safe to fully remove the bolts to put some loctite on them? i don't want to remove them only to have something drop underneath that I'm not able to get to.

Thanks!

50MileSmile · 08-03-2018, 08:54 PM

Discussed here:
https://www.camaro6.com/forums/showthread.php?t=533466

If you look through the top of the grill on both sides, this is what you’ll see. The jacking bolt rests on the bracket and is set at the factory.

08-03-2018, 08:45 PM	#1
atx_traveler Drives: blue velvet Join Date: Jul 2018 Location: Austin, TX Posts: 125	Bumper adjustment bolts Hi, I'm trying to get the bumper and hood fitment perfect. I came across this blog post: https://sandyblogs.com/techlink/?p=5622 but I realized my bolts don't have any (or very little) loctite on them. Is it safe to fully remove the bolts to put some loctite on them? i don't want to remove them only to have something drop underneath that I'm not able to get to. Thanks!

08-03-2018, 08:54 PM	#2
50MileSmile Drives: 2023 2SS, 2018 1SS 1LE, 1993 Z/28 Join Date: Jun 2018 Location: Midwest Posts: 819	Discussed here: https://www.camaro6.com/forums/showthread.php?t=533466 If you look through the top of the grill on both sides, this is what you’ll see. The jacking bolt rests on the bracket and is set at the factory.

User Name		Remember Me?
Password