You are browsing camaro5 
 |
|
07-27-2017, 10:12 PM
|
#1 |
    
Drives: 2015 1LE Join Date: Oct 2015
Location: Cleveland, OH
Posts: 1,485
|
1LE cradle bushings
Does a 1LE have different cradle bushings than a regular SS?
|
|
|
|
07-28-2017, 04:14 AM
|
#2 |
      
Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008
Location: Eufaula, Alabama
Posts: 6,427
 |
Yes, the are much firmer but you can get stiffer ones. When I had the 1LE track pack installed on my car it really help cut down on wheel hop.
|
|
|
|
|
07-28-2017, 08:23 AM
|
#3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Get solids from one of the vendors you won't be disappointed!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-28-2017, 08:57 AM
|
#4 |
|
Drives: 2015 1LE Join Date: Oct 2015
Location: Cleveland, OH
Posts: 1,485
|
I have a 1LE and wanted to upgrade the subframe bushings and was trying to decide on poly or solid. Sounds like most people recommend solid. Even though these dont transmit much NVH I was wondering how it will get with aftermarket trailing arms with poly bushings.
|
|
|
|
|
07-28-2017, 10:44 AM
|
#5 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
I would get Solids!
However, remember if you replace your Cradle or Diff Bushings, there is no way to go back without buying a New Cradle |
|
|
|
|
07-28-2017, 11:02 AM
|
#6 |
|
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
You shouldn't see any NVH till you do diff Bushings and only minor on arms.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-28-2017, 11:19 AM
|
#7 |
|
Drives: 2015 1LE Join Date: Oct 2015
Location: Cleveland, OH
Posts: 1,485
|
Solid it is!
|
|
|
|
|
|
|
|
 |
|
|
