12-03-2019, 02:46 PM | #1 |
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
Tire size help for my 15" wheel conversion
Has anybody use the M/T Street R 325 50 R15 on an SS without any fitment issues? I know a lot of people use the 275 60 R15 but I don't really like that they recommend an 8 inch width wheel (7.5-9.5) and I have the Weld 15x10
|
12-03-2019, 08:27 PM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Is this going to help?
https://www.camaro6.com/forums/showthread.php?t=509843
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
12-03-2019, 09:08 PM | #3 |
Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
The 275 is fine on a 10” wheel. I ran the 325 like in the link above and it worked ok. Then I tried the 275 pro that everyone raves about and it seemed about the same. I don’t think our local tracks are as good as some others you hear about.
I think I am going to go back to the 325’s next time. I like the way they look. Then get another set of rims and put some slicks on them. Then when I am at the track and can try both and see if I can learn anything.
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
12-05-2019, 07:30 PM | #4 |
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
Thanks guys. I will go with the 325's
|
|
|
Post Reply
|
|
|