07-17-2018, 02:02 PM | #1 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,770
|
Konig Ultraform 19x10.5-40 / 19x9-35
Anyone running this setup ? How do they sit ?
Thinking ahead for winter n snow tires!
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
07-17-2018, 04:32 PM | #2 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
ok so im guessing you want
19x9.5 35et front 19x10.5 40et rears more clear 10.5 40 yes it works 9.5 i would recommend lower like a 25et just watch out with caliper clearance/ the higher the off set the more likely you are to hit excuse my prev post as i was talking a dif, brand lol Last edited by Carlos_MRRWheelsInc; 07-17-2018 at 04:54 PM. |
07-18-2018, 12:33 AM | #3 |
all it takes is cash
Drives: 2018 LS V6 1LE; E350 wagon; Model3 Join Date: Jan 2017
Location: San Diego
Posts: 372
|
I looked closely at Konig: cheap, light and good quality, but I didn't find the offset I wanted for my square setup. MRR should be considered, especially because they make the right offset and I think you can get them hubcentric. MRR is about twice the price of Konig, and close to Enkei's racing series wheels.
|
08-31-2018, 10:02 AM | #4 |
Shifts under load
Drives: 2020 Camaro 1SS 1LE rally green Join Date: Apr 2017
Location: Fuquay-Varina, NC
Posts: 1,295
|
What about a 19x10 28mm all around? What would I need for the front if that doesn't work, a 5mm spacer?
__________________
24 Audi S3 prem plus, sport package
HPDE - southeast - JTI- solo, PCA- blue. 22 Suzuki GSX-S 1000GT blue |
|
|
Post Reply
|
|
|