11-06-2020, 06:35 AM | #1 |
Drives: 2017 1le current /2015 2ss 1le sold Join Date: Jan 2016
Location: Whitesburg Ga 30185
Posts: 759
|
Harness Bar and Racing seat
What combination are y'all using for seat,slider, bar,and harness ? Any issues?
__________________
2017 1LE Hyper Blue
|
11-06-2020, 10:00 AM | #2 |
Drives: Camaro 1ss Join Date: Nov 2019
Location: Wisconsin
Posts: 494
|
RPM roll bar, Crow harness, Planted technologies Seat base, Sparco seat, mounts and sliders. No issues. I'm 6'2 and I'm debating pulling sliders out as it's a little to tight for comfort but not horrible.. No sunroof car.
__________________
Follow me on IG for build thread! https://www.instagram.com/tracked_1ss/
YouTube: https://www.youtube.com/@Tracked_1ss FortuneAuto Coilovers! https://shop-fortune-auto.com/produc...ries-coilovers |
11-08-2020, 03:00 AM | #3 |
1LE Convert
Drives: 2018 ZLE Join Date: Apr 2017
Location: Mountain View, CA
Posts: 367
|
Sparco base, side brackets, and QRT-R seats on sliders. Seats are a bit low for my taste and I want to hard mount but without the sliders the seats are way too low and too far back. Brey-Krause harness bar with Sparco belts.
__________________
2018 Camaro ZL1 1LE (Red Hot)
2002 BMW Spec E46 race car (Lizard Green) Previous cars: - 2018 Miata RF GT (Machine Gray/Auburn) - 2017 Camaro 1SS 1LE (Summit White) - 2008 BMW 135i (Montego Blue) - 1996 BMW 328i (Arctic Silver) |
11-08-2020, 11:47 AM | #4 |
|
You guys that have installed seats, mounts, brackets, sliders, etc, can you share parts numbers for everything required?
Thanks |
11-14-2020, 09:40 PM | #5 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
I have Brey Kraus seat brackets and harness bar, sparco evo seats and harnesses. Because of the sunroof I had to hard mount the seats to the floor for helmet clearance.
I bought the wiring harness for both seats so I could keep that airbag light off, stock seat belts still in there, works great. |
11-15-2020, 07:10 PM | #6 |
Drives: 2020 Camaro ZL1 1LE Join Date: Jul 2020
Location: IN
Posts: 69
|
For all of you who have changed seats... what dash lights/warnings/chimes etc. should I expect to have to live with when I make the swap?
|
11-15-2020, 07:23 PM | #7 |
Drives: 997 GTS, ZL1 A10, ZLEM6, ZLEA10 Join Date: Dec 2017
Location: NYC/NJ
Posts: 630
|
Sorry to chime in and ask a question OP - anyone use the stock seats with a 5 point harness? What set works for that? Thx
|
11-15-2020, 07:41 PM | #8 | |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Quote:
There's a work around for all of it, I have no lights on and control of my mirrors now. |
|
11-15-2020, 07:42 PM | #9 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
|
11-20-2020, 08:53 PM | #10 | |
|
Quote:
|
|
11-20-2020, 08:54 PM | #11 |
|
|
12-09-2020, 10:49 PM | #12 |
Drives: Chevy Camaro ZL1 Join Date: Jun 2020
Location: TX
Posts: 2
|
I'm also looking at the wiring harnesses for my ZL1 as well. Additionally is any parts from the stock seats are reused?
|
12-09-2020, 11:31 PM | #13 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
I posted this on another thread. It's actually really simple.
Just buy the seat wiring harnesses. 84280995 for the passenger side and 84280991 for the driver's side. Get a resistor for the airbag, swap over memory function control module, passenger occupancy sensor. It'll plug into the seat belts if you're keeping those. |
12-09-2020, 11:35 PM | #14 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
|
|
|
Post Reply
|
|
|