05-02-2022, 09:21 AM | #1 | ||||
Driver for Hire
|
Maintenance Videos: Pad Change, Diff Fluid Swap, Trans Fluid Swap, Brake Fluid Flush
Hey everyone,
I've been making some short videos on some key maintenance items for the Camaro. Check them out and let me know what you think: Pad Change: Brake Fluid Swap: Diff Fluid Change: Transmission Fluid Swap:
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
||||
05-05-2022, 08:30 AM | #2 |
Drives: Chevy Camaro Join Date: Jan 2022
Location: AL
Posts: 88
|
Great stuff man. Way better than waiting 5 min for someone to plug their like an subscribe follow me everywhere and here's my sponsors you tube vids lol.
Concise and clear with a good view 10/10
__________________
'22 2SS 1LE manual in Red Hot with Red seat belts, alloy pedals, PPF, catch can, and suede kneepads.
|
05-05-2022, 10:01 AM | #3 |
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 389
|
Really good videos. I came for the DIFF fluid swap, then immediately turned it off when I saw the car on 4 jack stands and you crawling under it. I don't have the balls for that, therefore my dealership will be getting my $100 bucks for that project each time.
I'm not cutout for potentially be crushed to death, much respect for all you guys and gals that do this daily. Great videos, much appreciated! |
05-05-2022, 11:29 AM | #4 | |
Driver for Hire
|
Quote:
I'm glad you liked the video.
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
|
05-05-2022, 11:32 AM | #5 | |
Driver for Hire
|
Quote:
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
|
05-18-2022, 02:56 PM | #6 |
Drives: 2017 Blue Camaro 1SS 1LE with PDR Join Date: Sep 2018
Location: Houston, TX
Posts: 962
|
Thanks for posting these! They would have made it easier for my first time doing these tasks if they existed a few years ago and I'm sure they will help others.
Notes/Feedback: The service manual doesn't mention using any grease/lubricant on the front pads like you do in your video but it probably won't hurt anything and it does say to use it on the rear pads in the same spot you showed. The Permatex ceramic extreme 24129 that you used is the only product that I found with a high enough temperature rating for track use...the green Permatex stuff I tried before got too hot and disappeared after a track day. You should also add a reminder to the video to pump the brake pedal a few times until it gets firm at the end of the video so someone doesn't forget and hit something if the pedal goes to the floor on their test drive the first time they try to stop! Also in my experience, removing the brake fluid cap makes it easier to press the pistons back in (not mentioned in the service manual) but make sure to leave yourself a note to put it back on and twist it afterwards so you don't forget. And watch out because it may pop off and fall into the engine bay when you push on the pistons if you leave it sitting loose on top of the reservoir! The service manual says you need to drain 8oz of the OEM transmission fluid after you fill it, or measure the level at 1/8" below the fill plug with bent mechanic's wire. You should update your video since you are currently instructing people to overfill the transmission fluid. This was edited into the DIY photo thread: https://www.camaro6.com/forums/showthread.php?t=492814 This may not apply to other non-ATF fluids if they don't expand as temperature increases: https://www.camaro6.com/forums/showt...6#post10870206 The service manual calls for using sealant on the manual transmission fill plug (Genuine GM Parts 12346004 - Liquid Teflon Sealant 50cc Tube). This Permatex Hi Temp Thread Sealant 59214 seems to be equivalent. I have done it without sealant in the past and found no leaks after a few track days...maybe the extra leftover sealant on the threads did the job. Torque is 20 lb ft for the transmission fill plug. Like you mentioned in a comment on YouTube, the service manual calls for using the transmission fluid temperature sensor (right below the fill plug) as the drain plug instead of the actual drain plug. It is less messy that way. Torque is 20 lb ft for the transmission fluid temperature sensor (need a deep socket [15mm I think] or crow's foot wrench) and the service manual says to use the same sealant I mentioned above before reinstalling it. I used loctite blue 242 last time and it was not leaking when I checked after a few track days. Mine had a loose purple plastic piece with slots for the electrical pins that fell out from inside of the connector when I unplugged it last time so watch out not to lose that and tuck the connector away facing up so it can't fall out while you drain the fluid. I think it is supposed to stay in place when you unplug it though. If I remember correctly, you can also use a 1.5" long 3/8 extension to loosen the fill plug without unclipping and moving the cooler pipe hard line, but the service manual says to unclip and move it. Last edited by cdrptrks; 11-09-2022 at 01:21 PM. |
05-18-2022, 04:16 PM | #7 | |
Driver for Hire
|
Quote:
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
|
04-06-2023, 10:48 AM | #8 | |
Drives: 2017 Blue Camaro 1SS 1LE with PDR Join Date: Sep 2018
Location: Houston, TX
Posts: 962
|
Quote:
The purple plastic piece fell out again (this time when I was about to plug the connector back into the sensor) but thankfully it just fell onto the ground and not into the transmission fluid since I tucked the connector up before draining the fluid and moved the fluid catch container our of the way after it finished draining. I don't think it fell out the time before that. Also I have been using a small handheld manual fluid transfer pump with hoses for in and out but I probably should switch to a pump style that screws into the bottles because it is easy to accidentally tip the bottles over and spill fluid while pumping with my current pump. Last edited by cdrptrks; 04-06-2023 at 11:12 AM. |
|
04-06-2023, 10:58 AM | #9 | |
Drives: 2017 Blue Camaro 1SS 1LE with PDR Join Date: Sep 2018
Location: Houston, TX
Posts: 962
|
Quote:
Also torque for the eLSD drain and fill plugs is 24 lb ft according to the service manual and no thread sealant is called for. I have been using this torque value since I got the car with no issues like loosening or leaks from those plugs. Last edited by cdrptrks; 04-06-2023 at 11:10 AM. |
|
04-06-2023, 11:02 AM | #10 |
Driver for Hire
|
For sure! I’ve decided I’ll have to make an updated Trans fluid video in the future. I’m almost at the 15 hours of track time on the trans fluid so when I do, I’m going to make another video calling out all the torque specs, and using the sensor plug to drain. I appreciate the feedback on the sealant you used. I may just buy the OEM stuff in the future.
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
04-06-2023, 01:15 PM | #11 |
TEXIT
Drives: 2019 ZL1 M6 Join Date: Aug 2018
Location: Republic of Texas
Posts: 160
|
FYI. When I changed my tranny fluid I was intrigued by the 1/8" less than the fill plug that GM says in the manual.
I called tremec and they advised me not to worry about the 1/8" less than the fill line when refilling. That was years ago and I have had no issues with my tranny when I filled to the plug then let it run out to the line. |
04-06-2023, 01:27 PM | #12 | |
Driver for Hire
|
Quote:
__________________
Luan Zeqollari
2022 Camaro SS 1LE M6 - Wild Cherry Tintcoat - Delivered 9/20/21 2018 Camaro SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel |
|
|
|
Post Reply
|
|
|