10-18-2022, 05:12 PM | #1 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
HEADACHE! I'm totally confused
2017 Camaro 2LT RS Convertible, Chevy OEM wheels 20"x8.5" 25mm Offset front and rear.
I've tried searching and reading, but my headache get's worse as my confusion grows. I need new tires and wheels, scraped too many curbs. The last time that I bought wheels was 45 years ago, I'm 66. Now I see offset -, offset +, 8.5", 9" 9.5", 10". The tires that I want BGOODRICH G-FORCE COMP-2 A/S PLUS, Front & Rear 245/40ZR20 Ultra High Performance All-Season or CONTINENTAL EXTREMECONTACT DWS 06 PLUS, Front & Rear 245/40ZR20 Ultra High Performance All-Season. I'm retired on a fixed income so wheels will be rotated so the tires last longer. What size wheels can/should I buy without having to worry about whether those tires will fit and there won't be an issue with my car.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
10-18-2022, 06:38 PM | #2 |
Shadow Gray '19 ZLE M6
|
Buy:
- 20" wheels - 8.5" width - ET25 offset Same diameter, width & offset as your stock wheels and will fit either of those 245/40/20 tire options.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
10-18-2022, 07:09 PM | #3 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
Thanks, I haven't seen any aftermarket wheels with 25 offset. How far in either direction can the offset be, or does it have to be 25mm? That's where a lot of my confusion comes from.
When I go to sites like Tirerack and put my Camaro 2LT in, they all show front and rear staggered sizes. Even though the 2LT RS wasn't sold with front and rear staggered size wheels. Most of the wheels that I like have a +35 offset. My camaro is Nightfall Grey and I want to go with black or dark wheels. I really like these 4play wheels but they're a +35 offset.
__________________
Glenn
2017 Camaro 2LT RS Convertible Last edited by truckrglenn; 10-18-2022 at 07:43 PM. |
10-18-2022, 08:01 PM | #4 | |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
Quote:
Like can I run a 20"x8.5" +35 offset with those tires and no rubbing? Or rubbing only when the wheels are turn completely left or right? Like can I run a 20"x9" +35 offset with those tires?
__________________
Glenn
2017 Camaro 2LT RS Convertible |
|
10-18-2022, 08:54 PM | #5 |
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
APEX wheels and get the DWS06+. The BFG are directional and can't be rotated criss cross apple sauce.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
10-18-2022, 09:24 PM | #6 | |
Shadow Gray '19 ZLE M6
|
Quote:
I bought my wheels from PK Auto Design. Also a forum sponsor, very knowledgeable and they carry a wide selection, but typically a higher price tier and you mentioned being on a fixed income.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
|
10-19-2022, 01:28 AM | #7 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
whew, those are out of my price range at this time. I wasn't planning this but I had a side wall give out and split open. It's still hold air, but I'm not driving it. The tires are the originals with 30,000 miles on them but over 5 years old.
I might just have to go with new tires for the time being. Temps are dipping early here in Tennessee and it a bit chilly riding my Fatboy after the son goes down. My budget after taxes is definitely under $2500. I figured that it'd be cheaper in the long run to buy both now, then have to have the tires remounted in the future. From all of my reading, I gather that if I go with 20"x8.5" wheel, the offset can be between +20 to +35 and I'll be ok without any rubbing. Please correct me if I'm wrong.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
10-19-2022, 06:13 AM | #8 |
Drives: Chevy Camaro 2021 ,rs, v6, manual Join Date: Feb 2022
Location: Georgia
Posts: 868
|
I would not go more than +30 offset. The wheels will be in closer and stance will not look good. Tire rack has some nice 20" with+20 offset. You could get a19" wheel and use a 245-45-19 tire.
|
10-19-2022, 09:24 AM | #9 |
Somewhere in the Kalahari
Drives: 2021/18 (de-fresh) 3LT RS Join Date: Dec 2017
Location: California
Posts: 651
|
Maybe try Craigslist for a set of someone's factory take-off wheels in your local area? That's one way to freshen up your wheels and maybe change up your look, on a budget.
|
10-19-2022, 11:10 AM | #10 |
Drives: 70 GTX, 06 Mustang, 22 Camaro LT1 Join Date: Jan 2022
Location: PA
Posts: 107
|
+1 ... I would also scan our member's classified here. Many times people want to sell their very fresh originals when they put aftermarket wheels on, often with almost new tires installed and tpms ready to go.
|
10-19-2022, 11:43 AM | #11 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
I'll check them out.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
10-19-2022, 08:54 PM | #12 |
Drives: Chevy camaro Join Date: Jan 2022
Location: Tennessee
Posts: 191
|
One last question, I hope. Will these fit my 2017 Camaro 2LT RS Convertible: 20" Black 5443 Wheels SET of (4) Fits Camaro - SS Style Rim 20x9 (non-staggered). Just noticed that the offset is 35. Dam, cause I can get a new set of 4 for $772.00.
__________________
Glenn
2017 Camaro 2LT RS Convertible |
10-19-2022, 10:35 PM | #13 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
I sold my factory black satin finish upgraded wheels with tires (<3k miles) for like $800 on here a couple years ago. Watch the classifieds, that’s what I would do in your situation.
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
10-20-2022, 06:19 AM | #14 |
Drives: 2016 1LT 'Vert Join Date: Feb 2022
Location: Midwest
Posts: 171
|
Refurbish option?
Do some searching and see if you can find a reputable wheel repair business in your region. As long as your wheels are only curb rash and moderate scrapes, wheel refurbishing may be a cheaper alternative. I imagine if you wanted them repaired and painted black, this could be done for cheaper than a new set, and you wouldn’t need to worry about fit at all.
For reference I had OEM machine face wheels (not the Camaro’s) redone for $125 each last summer. |
|
|
Post Reply
|
|
|