You are browsing camaro6 
06-19-2021, 04:36 AM
|
#1 |
 Drives: Chevy Camaro ss Join Date: Jun 2021
Location: Greenwood Indiana
Posts: 2
|
My car pulls to the left when under a load
Yea my 6th gen when I increase speed or accurate it pulls to the left every time
Trying to figure this out … I’ve checked over the rear suspension didn’t find anything wrong but I can’t rule out anything any help would be appreciated And it does it at light accusations…… when coasting stopping the car goes straight no pulling then…. Turning seem normal |
|
|
|
06-19-2021, 07:19 AM
|
#2 | |
          
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,749
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
|
|
|
06-19-2021, 07:53 AM
|
#3 |
 
Drives: 2016 2SS Join Date: Apr 2020
Location: Florida Man
Posts: 86
|
Might sound a bit stupid, but did you check your tire pressures?
|
|
|
|
|
06-19-2021, 12:46 PM
|
#4 |
Drives: 2017 1SS 1LE Join Date: Jun 2016
Location: Detroit, MI
Posts: 1,001
|
Ditto, check tire pressures and alignment. I'd also check stabilizer bars and links to make sure everything is tight there. Acceleration causes the body to roll and uneven loading between L and R sides from engine torque, unlike coasting and braking. It's likely alignment and/or tire pressures are off just enough to not be noticeable except for accelerating.
__________________
2017 SS 1LE.
|
|
|
|
|
06-19-2021, 03:27 PM
|
#5 |
|
Drives: Chevy Camaro ss Join Date: Jun 2021
Location: Greenwood Indiana
Posts: 2
|
Well I switched back tires sides and now it goes right so it in the tires they both have 34psi but I think I found the problem one of my new ps4 has code M01 and the other has NA0 code
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
