What did you do to your 6th Gen Camaro today?! - Page 184

HyperBlue#1 · 03-13-2017, 06:36 PM

Dark tail lamps, black out kit, new badge. Looks sick huge difference.

ckahsen · 03-13-2017, 06:40 PM

Quote:

Originally Posted by HyperBlue#1

Dark tail lamps, black out kit, new badge. Looks sick huge difference.

That looks awesome man! I really like it with the hyper blue. I wonder how the blacked out lights would look on my Garnet red.

Side note. I parked mine in the garage today and batttoned down the hatches in preparation for winter storm Stella. 5-10" expected.

Sent from my SM-N920P using Tapatalk

keon718nyc · 03-13-2017, 06:48 PM

Quote:

Originally Posted by ckahsen

That looks awesome man! I really like it with the hyper blue. I wonder how the blacked out lights would look on my Garnet red.

Side note. I parked mine in the garage today and batttoned down the hatches in preparation for winter storm Stella. 5-10" expected.

Sent from my SM-N920P using Tapatalk

Here is some pics of Garnet Red with GM Dark Tail Lamps - http://www.camaro6.com/forums/showth...arnett&page=23

Also i am not looking forward to 12-24" of snow tomorrow. All i know is my back is going to hurt for 2-3 days after all said and done LOL

Wolvie70 · 03-13-2017, 10:06 PM

Rattle canned the drip trays

kgf · 03-14-2017, 08:09 PM

I installed my new splitter that I purchased with a $500 accessory certificate from GM. My cost was $50 plus tax. Thanks GM.

Name: SPLITTER.jpg
Views: 1127
Size: 154.6 KB

Name: SPLITTER.jpg
Views: 1127
Size: 154.6 KB

Adrian97c · 03-14-2017, 08:16 PM

Quote:

Originally Posted by kgf

I installed my new splitter that I purchased with a $500 accessory certificate from GM. My cost was $50 plus tax. Thanks GM.

Attachment 857868

Nice! I'm getting the RPI gloss black shipped for $300.

Sent from my iPhone using Tapatalk

kgf · 03-14-2017, 08:25 PM

Quote:

Originally Posted by Adrian97c

Nice! I'm getting the RPI gloss black shipped for $300.

Sent from my iPhone using Tapatalk

That is a great price too. I was impressed with the quality of the GM piece and shipping was really fast. Would have ordered online if I didn't have the certificate to use.

TenSeven · 03-15-2017, 03:30 AM

Quote:

Originally Posted by HyperBlue#1

Dark tail lamps, black out kit, new badge. Looks sick huge difference.

Looks good, but would look even better if the pic was horizontal.

Our modern phones take pics at very high resolutions. When you post those very hi-rez pics, the forum software gets confused and shows the pics vertically or up-side-down.

To stop this, all you need to do is install a FREE image re-size app on your phone.

Take a pic on your phone, use the FREE app to resize it to 50%, then post it. No more vertical pics!

Pretty please? With sugar on top?

CWOFOR · 03-15-2017, 04:24 PM

[ATTACH]Attachment 858025[/ATTACH]I have been lurking on this thread for a bit and now I finally have something to add. Today my ZL1 style splitter from C7 Carbon arrived and took about 30-40 minutes to install (some of the screw holes were a bit hard to get realigned). I am really pleased with the way it looks and fits. It also hides the rubber air deflectors some what. C7 did a fine job of ensuring it easily lines up & fits. If there is any down side to this splitter it would be that (according to C7) they only have one mold for this splitter, which means it took 7 1/2 weeks from the time I placed my order until I received it. I sure hope C7 gets another mold made in order to speed this process.

Name: I.jpg
Views: 700
Size: 196.8 KB

[ATTACH][ATTACH] Name: L.jpg
Views: 765
Size: 196.4 KB

[/ATTACH][/ATTACH]

Sev · 03-15-2017, 04:58 PM

Did this over the weekend, but got the Oracle Tinted LED side markers installed. Super easy to install like Sledge said.

Adrian97c · 03-15-2017, 05:07 PM

Quote:

Originally Posted by CWOFOR

[ATTACH]Attachment 858025[/ATTACH]I have been lurking on this thread for a bit and now I finally have something to add. Today my ZL1 style splitter from C7 Carbon arrived and took about 30-40 minutes to install (some of the screw holes were a bit hard to get realigned). I am really pleased with the way it looks and fits. It also hides the rubber air deflectors some what. C7 did a fine job of ensuring it easily lines up & fits. If there is any down side to this splitter it would be that (according to C7) they only have one mold for this splitter, which means it took 7 1/2 weeks from the time I placed my order until I received it. I sure hope C7 gets another mold made in order to speed this process.

Love the W shape! Does it come in Gloss black also? I don't plan on doing carbon

Sent from my iPhone using Tapatalk

Adp2017 · 03-15-2017, 05:28 PM

ZL1 adons tow hook plate holder installed. I like it!

CWOFOR · 03-15-2017, 10:21 PM

Quote:

Originally Posted by Adrian97c

Love the W shape! Does it come in Gloss black also? I don't plan on doing carbon

Sent from my iPhone using Tapatalk

As far as I know it only comes carbon fiber. You could always paint it, however my painter advised that rock chips would stand out more if it was painted. So I decided to mount it as is for now and if it gets chipped up then I'll get it painted to match.

BowtieRocket · 03-15-2017, 10:27 PM

Quote:

Originally Posted by CWOFOR

[ATTACH]Attachment 858025[/ATTACH]I have been lurking on this thread for a bit and now I finally have something to add. Today my ZL1 style splitter from C7 Carbon arrived and took about 30-40 minutes to install (some of the screw holes were a bit hard to get realigned). I am really pleased with the way it looks and fits. It also hides the rubber air deflectors some what. C7 did a fine job of ensuring it easily lines up & fits. If there is any down side to this splitter it would be that (according to C7) they only have one mold for this splitter, which means it took 7 1/2 weeks from the time I placed my order until I received it. I sure hope C7 gets another mold made in order to speed this process.

Splitter looks great...plan on getting the cheap fiberglass one in gloss black and clear bra it

03-13-2017, 06:36 PM	#2563
HyperBlue#1 Drives: Hyper blue 1ss Join Date: Mar 2017 Location: Atlanta, GA Posts: 52	Black Dark tail lamps, black out kit, new badge. Looks sick huge difference. Attached Images

03-13-2017, 10:06 PM	#2566
Wolvie70 Drives: 2016 2SS, Summit White, A8, NPP Join Date: Apr 2013 Location: Arkansas Posts: 717	Rattle canned the drip trays Attached Images

03-15-2017, 04:24 PM	#2571
CWOFOR Drives: '16 1SS Join Date: Dec 2016 Location: Menominee, MI Posts: 71	[ATTACH]Attachment 858025[/ATTACH]I have been lurking on this thread for a bit and now I finally have something to add. Today my ZL1 style splitter from C7 Carbon arrived and took about 30-40 minutes to install (some of the screw holes were a bit hard to get realigned). I am really pleased with the way it looks and fits. It also hides the rubber air deflectors some what. C7 did a fine job of ensuring it easily lines up & fits. If there is any down side to this splitter it would be that (according to C7) they only have one mold for this splitter, which means it took 7 1/2 weeks from the time I placed my order until I received it. I sure hope C7 gets another mold made in order to speed this process. [ATTACH][ATTACH][/ATTACH][/ATTACH] Attached Images Last edited by CWOFOR; 03-25-2017 at 10:44 AM.

03-15-2017, 04:58 PM	#2572
Sev Drives: 2016 2SS / 2004 Tacoma Join Date: Feb 2016 Location: Meadow Vista, CA Posts: 795	Did this over the weekend, but got the Oracle Tinted LED side markers installed. Super easy to install like Sledge said. __________________ 2SS, Manual, Blue Velvet Metallic, Medium Ash Grey, Black Wheels, MRC, NPP, Black Bowties, Black GM Tail Lights, Oracle LED side markers. "I'm going to drink you pretty, beautiful toad"

03-15-2017, 05:28 PM	#2574
Adp2017 Drives: 2017 RS Turbo Join Date: Aug 2016 Location: Burlington, Ontario Posts: 376	ZL1 adons tow hook plate holder installed. I like it! __________________ 2017 1LT \| RS \| 2.0T \| M6 331 rwhp , 350 rwtq ZZP Intercooler \| ZZP Catted DP \| Magnaflow Catback \| Injen CAI \| Tuned (BBR) \| CNC Honed Turbo (TPC) w 14lb actuator

03-14-2017, 08:09 PM	#2567
kgf Drives: 2016 Camaro 2SS Join Date: Dec 2015 Location: Arkansas Posts: 59	I installed my new splitter that I purchased with a $500 accessory certificate from GM. My cost was $50 plus tax. Thanks GM.

User Name		Remember Me?
Password