06-09-2018, 01:04 PM | #1 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
ZLI ADD ONS LIFT POINTS
Just ordered. Has to make life easier and safer at dealer.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
06-09-2018, 01:10 PM | #2 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
best thing I did for the car
I also ordered some pucks and use them to actually do the jacking and then I use the lift points to rest on the jack stands I can have all 4 wheels of the ground in less than 10 minutes |
06-09-2018, 01:14 PM | #3 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Nice. What pucks did you go with? My jack stands are V shaped. i have a pad on my floor jack so think it would be OK
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
06-09-2018, 01:18 PM | #4 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I use two stacked on one another to clear the body work... also I bought rubber protectors at harbor freight for my jack stands sorry don't have a link for that ill add pics one of these days but I put the lift points furthest away from each other and then there is another jack point I use with the pucks |
06-09-2018, 01:23 PM | #5 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Tracking. have the same lift stand protectors. Tango.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
06-10-2018, 07:31 PM | #6 | |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Quote:
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
|
06-10-2018, 08:30 PM | #7 |
Drives: 2018 Hyper Blue 2SS convertible Join Date: Aug 2017
Location: S.E.Wisconsin
Posts: 182
|
need to order a set soon.
__________________
2018 HBM 2SS CONVERTIBLE A8 |
06-10-2018, 08:40 PM | #8 |
Drives: '17 2SS H50 Join Date: Mar 2016
Location: Louisa, Ky
Posts: 3,952
|
Mine are scratched up from jack stands...but my pinch welds are scratch free.
__________________
2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6
1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13 |
06-11-2018, 11:02 PM | #9 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Amazon stuff Arrived today neighbor wants some too. 17 bones and prime delivery. Appreciate the link and the fit is perfect do have C7 side skirts too
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube Last edited by Chris C 1SS 1LE; 06-11-2018 at 11:03 PM. Reason: Spelling |
06-12-2018, 11:44 AM | #10 |
Drives: 2021 Camaro SS 1LE Join Date: May 2009
Location: NM
Posts: 889
|
Those ones on Amazon do you have to stack 2 or will 1 clear the plastics?
__________________
2021 Camaro 1SS 1LE - Red Hot
2015 Camaro Z/28 - Red Hot 2001 Mecham Trans Am #3 - 7.0L LS1 |
06-14-2018, 08:14 AM | #11 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
I ordered 2 sets of ZL1 Add-ons Jack Pads and use 1 full set to support the Jack stands and 2 more pads mounted to the floor jack points works great. No need for pucks.
|
06-14-2018, 08:09 PM | #12 |
Drives: 2018 1SS 1LE Join Date: Aug 2017
Location: Pa
Posts: 100
|
I just put on my ZL1 lift pads without lifting the car. Let's just say that was a pain. It is not easy to do while laying on the ground.
|
06-15-2018, 07:42 AM | #13 |
"M1SS1LE"
Drives: 2017 SS 1LE Join Date: Dec 2015
Location: Upstate SC
Posts: 2,906
|
To me the jack points are must have mods on this car! The pinch weld is so far recessed that its pretty unreachable without some sort of jack point.
__________________
MJK3888 Instagram Link
|
06-15-2018, 11:43 AM | #14 |
Drives: 2018 Camaro 1LE Summit White Join Date: Oct 2017
Location: NH
Posts: 187
|
It's like a slut running loose in hell just trying to get our car off the ground.
We have to purchase this and that. The correct jack. The correct stands. The correct adapters. It's all to blame for that aluminum cross member up front... Do we even have a cross member up front underneath all that plastic? I don't understand it. I lifted my C6 Vette from the aluminum CM at the front several times. Has anyone removed the plastic to see what we're working with? I would use two floor jacks at the same time to lift my C6 Vette straight off the ground. Rear Dif and the Aluminum front CM. One Jack in the rear, one in the front. Set her down on the stands with aluminum pucks in the factory keyed fittings. |
|
|
Post Reply
|
|
|