You are browsing camaro6 
04-30-2021, 10:01 PM
|
#15 |
|
Patriot
Drives: 2019 Camaro 1SS 1LE Join Date: Sep 2020
Location: Texas
Posts: 136
|
Ok well it’s honestly just crap I found. The darker hoses are just standard fuel line. The more red hoses y’all may judge me for lol. It’s hose from a industrial pressure washer lol. Both are wrapped in some black and red wire loom that I got on Amazon. I just used all the factory connectors from the plastic lines. Minus the 90 degree off the manifold cover is just an autozone GM standard pcv connector. Manifold I bought from a forum member. And the throttle body and adapter plate came from wild hammer motor sports.
Just used 15 years of aviation mechanics knowledge to make assorted bull crap look professional lol |
|
|
|
05-01-2021, 05:25 PM
|
#16 |
|
Chief Bief
Drives: Nightfall Gray Camaro 1SS Join Date: Dec 2015
Location: Norfolk, Virginia
Posts: 208
|
Well it doesn't look tacky and from your aviation background, I'm sure you know what will hold under pressure. Looks good to me.
__________________
 2016 NFG 1SS M6 JLT Intake, LT2 Manifold, LT5 TB, CSP 2" headers, AWE Catback Exhaust, Apex ARC-8 Wheels. 426whp/434wtq |
|
|
|
|
05-01-2021, 08:49 PM
|
#17 |
 
Drives: 2017 Camaro 2SS Join Date: Apr 2020
Location: OH
Posts: 6
|
ThePeoplesCamaro, very nice and clean, here is what i did with mine from Summit Racing
|
|
|
|
|
03-23-2024, 08:20 PM
|
#18 |
 Drives: Camaro SS2 Join Date: Sep 2023
Location: Pennsylvania
Posts: 3
|
After reading these posts I understand the pcv stuff much better. But the question I have is what is the little black plastic box/part coming off cai tube that plastic tube hooks up to before going back thru tube to front of passenger valve cover?
|
|
|
|
|
03-23-2024, 08:29 PM
|
#19 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I'll be glad to, get rid of the 3/8 lines and go to 5/8. Even though this is a blower setup up it works the same for NA. Here is the simple routing of the hose.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
