Trufiber carbon parts coming soon! - Page 13

EDFHOBBIES · 04-30-2020, 06:30 PM

I had to trim about an inch and half off the wiper cover because they didn't realize the nipple on the reservoir neck slides into the reservoir in the fender so I dont know if the will sale like that or make correctly I need to go over and try the new fuse box cover aswell.

I was a my performance shop not trufiber incidentally..

EDFHOBBIES · 06-21-2020, 09:48 AM

Finally the fuse cover fits now! Every part has been perfectly molded except this little bugger! Took 3 attemps.

Brake Reservoir cover
Coolant Reservoir cover
Radiator cover 3 piece center is real replacement
Wiper Reservoir cover
Valve covers not shown

Working with vararam to make a whole replacement lid for OEM blower and eforce.

EDFHOBBIES · 06-21-2020, 10:03 AM

They usually make 2 samples so the other sample can probably be for sale on the fuse cover.. the brake cover could be but the wiper reservoir needs 1 1/2inches trimmed from bottom.. easy to do with tape and cut off wheel.

EDFHOBBIES · 12-30-2020, 07:44 AM

Finally had a chance to install the pillars and seatbelt covers.

EDFHOBBIES · 12-30-2020, 07:51 AM

Also going over today to see and pick up these parts.

brduke · 02-07-2021, 07:36 PM

Great - thanks for the info.
Looking for Canards for my 1LE
What is the pricing?

EDFHOBBIES · 02-07-2021, 07:48 PM

https://www.trufiber.com/shop/2016-2...lg358-canards/

Pretty sure you get a coupon when you sign up w a email to..

EDFHOBBIES · 02-27-2021, 01:38 PM

Picked up these and installed..

EDFHOBBIES · 04-11-2021, 04:28 PM

Exterior Finished..

https://youtu.be/J8-7Xdn0qEA

EDFHOBBIES · 05-05-2021, 06:43 PM

Tested and installed another part today. Trunk lid weighted in at 9.0 lbs vs 20 for stock part. Like all the parts so far they have test fitted perfectly.

EDFHOBBIES · 05-07-2021, 02:43 PM

Quote:

Originally Posted by NazNGMZL1

Someone needs to make something to cover the brushed silver strips on the doors where the lighting is. Only option is to but a black set from GM at $645. No thanks.

They are working on it just give them time the whole industry Anderson's, C7, and the rest are behind because of the virus.

EDFHOBBIES · 05-07-2021, 02:49 PM

Trunk insert turned out Amazing. I've attended a lot of carshows like the one at Cfest they ask you to leave the trunk open for judging this would be a very nice piece to have to stand out with.

Smokin19 · 05-08-2021, 07:15 AM

All these parts you get are really nice but, the rest of us can't get ANY of these parts from Tru-fiber. So why are you still promoting them.

EDFHOBBIES · 05-08-2021, 08:49 AM

Exterior:

Zl1 1le splitter
Zl1 1le bezels
Zl1 1le dive planes
Trunk not available yet just test fitted
Zl1 oem spoiler NA just test fitted
Rock guards out of stock
Side skirts out of stock

Interior:

1 part out of stock (pilars) out of 17 parts

Engine bay:

Coolant cover in stock
Radiator cover and extension in stock
Fuse box cover in stoc
Wiper reservoir out of stock
Brake reservoir out of stock

Just a few parts out of stock lmao..

04-30-2020, 06:30 PM	#169
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	I had to trim about an inch and half off the wiper cover because they didn't realize the nipple on the reservoir neck slides into the reservoir in the fender so I dont know if the will sale like that or make correctly I need to go over and try the new fuse box cover aswell. I was a my performance shop not trufiber incidentally.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

06-21-2020, 09:48 AM	#170
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Finally the fuse cover fits now! Every part has been perfectly molded except this little bugger! Took 3 attemps. Brake Reservoir cover Coolant Reservoir cover Radiator cover 3 piece center is real replacement Wiper Reservoir cover Valve covers not shown Working with vararam to make a whole replacement lid for OEM blower and eforce. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

06-21-2020, 10:03 AM	#171
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	They usually make 2 samples so the other sample can probably be for sale on the fuse cover.. the brake cover could be but the wiper reservoir needs 1 1/2inches trimmed from bottom.. easy to do with tape and cut off wheel. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 05-07-2021 at 02:26 PM.

12-30-2020, 07:44 AM	#172
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Finally had a chance to install the pillars and seatbelt covers. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

12-30-2020, 07:51 AM	#173
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Also going over today to see and pick up these parts. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 05-07-2021 at 02:45 PM.

02-07-2021, 07:36 PM	#174
brduke Drives: '18 1LE '12 V-Wagon, '16 F90 & M3 Join Date: Sep 2017 Location: USA Posts: 33	Great - thanks for the info. Looking for Canards for my 1LE What is the pricing?

02-07-2021, 07:48 PM	#175
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	https://www.trufiber.com/shop/2016-2...lg358-canards/ Pretty sure you get a coupon when you sign up w a email to.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

02-27-2021, 01:38 PM	#176
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Picked up these and installed.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

04-11-2021, 04:28 PM	#177
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Exterior Finished.. https://youtu.be/J8-7Xdn0qEA __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

05-05-2021, 06:43 PM	#178
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Tested and installed another part today. Trunk lid weighted in at 9.0 lbs vs 20 for stock part. Like all the parts so far they have test fitted perfectly. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 05-07-2021 at 02:44 PM.

05-07-2021, 02:49 PM	#180
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Trunk insert turned out Amazing. I've attended a lot of carshows like the one at Cfest they ask you to leave the trunk open for judging this would be a very nice piece to have to stand out with. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

05-08-2021, 07:15 AM	#181
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,551	All these parts you get are really nice but, the rest of us can't get ANY of these parts from Tru-fiber. So why are you still promoting them. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

05-08-2021, 08:49 AM	#182
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Exterior: Zl1 1le splitter Zl1 1le bezels Zl1 1le dive planes Trunk not available yet just test fitted Zl1 oem spoiler NA just test fitted Rock guards out of stock Side skirts out of stock Interior: 1 part out of stock (pilars) out of 17 parts Engine bay: Coolant cover in stock Radiator cover and extension in stock Fuse box cover in stoc Wiper reservoir out of stock Brake reservoir out of stock Just a few parts out of stock lmao.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

User Name		Remember Me?
Password