[waterman]

Originally Posted by Biscuit.fr

Tx
I thought about CC on the rotofab
But there is less clearance below to drain because of the AC pipe.
(AC line on the side mid engine, Moving into close to the CAI)
Plus the side of the rotofab has an angle
(Should have worked an homemade fixation except if you accept the CC to have this angle what I didn’t for the look...)

Yes the bracket is from Elite
(Just worked dremel a little bit as you can see to clear the second bolt on the bar, and add extra clearance for the AC pipe because I wanted CC to be closer to the side to clear the cooling line of the new reservoir).

Thanks.