[shinysun]

at the 4-5 gear changing, the spark timing is pulled too much.

Is it due to the rev. limit? the highest peak of RPM before the point, it is just 6590 RPM as I set the cutoff at around 7000~7100 RPM.





and the schedule of shifting is like the above.

1. What factors are limiting the rev?
2. I would like to change the shifting point like 6800 RPM.
What should I need to change?

Thank you in advance.

[wnta1ss]

Throttle is closing, so the rev limiter seems to be active in that area. You say that you raised the rev limiter to 7000-7100, did you also modify the In-Gear and EOT tables to reflect what you did for Extreme Cutoff? Those tables in my stock SS were only at 6600rpm for example.

[shinysun]

Originally Posted by wnta1ss

Throttle is closing, so the rev limiter seems to be active in that area. You say that you raised the rev limiter to 7000-7100, did you also modify the In-Gear and EOT tables to reflect what you did for Extreme Cutoff? Those tables in my stock SS were only at 6600rpm for example.

Yes, I did.