[k818mn1]

Originally Posted by 2SSRS@Gen5diy

Ok we did some tests, and went with the 1/2mm less then full screen (makes life easier to install) we have it in the car, here is a pic.

now we will have some made to sale, 2-4 weeks out.

Is that a picture of the one that didn't fit? It looks too big so it's not stuck down along the top edge. Have you fixed that with the final version that you will sell?

[2SSRS@Gen5diy]

Originally Posted by k818mn1

Is that a picture of the one that didn't fit? It looks too big so it's not stuck down along the top edge. Have you fixed that with the final version that you will sell?

That's the gap we left, if you go any bigger its hard to set it down.

[JaxChris]

Were these ever made and did you get the bubbling out of the one you showed in the pic with the video playing?

[2SSRS@Gen5diy]

we are working on better film, that will let out the bubbles need more time.

[Corrado68]

Originally Posted by Modshack

Agree...That would solve the whole problem..Reflections are not completely gone, but at least minimized somewhat with the screen protector..

I just bought the same screen protector on Amazon and applied it, it looks great and the reflections are almost completely gone.

You can notice the shift knob in the two attached pictures: it's clearly reflecting in the screen when it's outside of the area covered by the protector, but there's virtually no reflection in the second picture where I moved the camera on the right.

[chozn4service]

What is the actual measurement of the screen? I know it's an 8" screen but what are the vertical and horizontal lengths?


Sent from my iPhone using Tapatalk

[Corrado68]

The screens are 6"3/4 wide by 4" tall (maybe 1/64" more than that, I don't have a high precision measuring tape), which is exactly the size of the active part of the Camaro 8" display, minus about 1/32" (this small difference helps you with the alignment of the protector when you're positioning it)

[chozn4service]

Yea I was referring to the entire screen dimension


Sent from my iPhone using Tapatalk

[Com69]

Universal screen protector cut to fit, still going strong after 3+ months. Super easy to make a template and cut. Covers every inch. I'll probably replace after the winter, just to satisfy my OCD.

[diirk]

Originally Posted by Com69

Universal screen protector cut to fit, still going strong after 3+ months. Super easy to make a template and cut. Covers every inch. I'll probably replace after the winter, just to satisfy my OCD.

Looks good. Do you have a link to the screen protector you bought?

[Com69]

Originally Posted by diirk

Looks good. Do you have a link to the screen protector you bought?

I don't even remember what brand I bought. I probably just hit Walmart and grabbed a universal tablet screen protector.