02-22-2024, 08:49 PM | #43 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,623
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
02-22-2024, 09:24 PM | #44 |
Drives: 2017 1SS M6 Join Date: Jul 2023
Location: North Carolina
Posts: 119
|
Oh nice! Ill have to see if I can find some shops around here that can do it locally
__________________
2017 1SS M6
~ Air Raid Cold Air Intake~ ~ 3" Corsa Extreme Catback Exhaust ~ |
03-21-2024, 05:18 PM | #45 |
BLACK 2019 ZL1
Drives: 2007 COBALT, 2019 CAMARO ZL1 Join Date: May 2022
Location: B.C. Canada
Posts: 109
|
Headers were definitely worth it to me and I recommend them. Car pulls much harder on the top end around 5k and past, no torque loss down low, engine breathes better and there is less restriction. (I'm catless) Exhaust sounds much better, I have no issues with not being ceramic coated but I don't track (road course) the car, only drag race or do summer cruises. I gained 40 wheel hp on 93 octane with a rotofab cold air intake. When I was purchasing my headers I was also looking at the FI interchiller kit but headers were something I always wanted. Full BMR suspension is going in over the next few weeks; cradle lock out kit, non-adjustable upper control arms, non-adjustable upper and lower trailing arms, double adjustable toe rod ends, driveshaft loop, tunnel brace. Next power mod will be my flex fuel kit with +30 injectors and a JMS low side boost a pump, hoping to be able to run E50-E60 max. I was debating doing a lower pulley and porting the blower, still might, but the flex kit seems like a more effective mod and will help keep temps at bay.
|
|
|
Post Reply
|
|
|