12-05-2018, 10:33 AM | #1 |
Drives: 2017 2SS 50th Anv, 1972 RS Join Date: Mar 2009
Location: Oklahoma City
Posts: 1,588
|
TSW nurburgring 20x9 and 10" 6th gen SS
I have done a lot of forum searching but couldnt lock down a clear answer. Hoping someone can assist. I am looking to buy a set of used 20" 9" front and 10" back TSW nurburgring from a guy that has a 5th gen to put on my 2017 SS. He is not sure of the offsets but looking at some different configuration sites, they are all probably at 35, the fronts could be 43, not sure. I would I have an issue with these? And I assume 305 would be ok for that back? what are most using for the 9" front?
Thanks in advanced and sorry if this is already answered somewhere. |
12-16-2018, 12:20 PM | #2 |
Drives: 2019 F150 Join Date: Jul 2016
Location: Virginia
Posts: 203
|
I used www.willtheyfit.com to figure out my TSW 19' wheel offset's for a square setup. I suspect you will need to be around +18 or +27et 20x9 for a square setup that won't poke too much on the back quarters. Few months ago a thread that had pics of a members SS with 20x10 +23et 285/30R20 looked about as good as you can get square.
stock SS 1LE front 20x10 +20et , rear 20x11 +43et |
|
|
Post Reply
|
Tags |
tsw |
Thread Tools | |
|
|