[Apex Wheels]

Mike's wild ZL1 1LE was posted up at the Torco booth during Camaro Con earlier this month, rocking our 19x11"/19x12" setup.

19x11" ET11 front with 305/30-19 Goodyear SuperCar 3R
19x12" ET41 rear with 325/30-19 Goodyear SuperCar 3R




- Cory

[Cherry]

19x10 EC-7's in satin black with Michelin PS4s

[Apex Wheels]

Jason's 19x10" front and 19x12" rear winter setup looks right at home on his ZL1 1LE. Wrapped in Michelin A/S 3+ tires, he should have everything he needs to tackle the colder temps.





- Cory

[Danew_377]

For the arc-8 are there going to be any other colors besides the anthracite and satin black? Looking to get a set in your 19x10 as a square setup. Hoping for a bronze or copper.

[enzia35]

I’d really like a bronze too. That’d look the best with garnet red.

[Blackmonba6Gen]

After a long decision looking at different wheel manufacturers, I just placed an order on the following setup from APEX ARC 8 the site say direct fit:
Front: 19x10” ET20 with 285/35-19 tires
Rear: 19x11” ET43 with 325/30-19 tires

Tires choices in mind: Nitto G2’s,NT01,Michelin PS4S

I do have MRC. Will the 325s cause any rubbing or issues with the strut with such a wide tire with stock height? I seen lots of threads with 305 but not 325 for an SS. It seem the 1LE are popular. I’ve been trying to find some photos with this setup to wrap my head around it and haven’t ran across any yet. If any photos please share as I’m curious to see how it will look before buying the tires. Thanks

[Qlimax]

Did this set up require any mods? Pretty much I need a 19x11 rim that fits with a 305tire probably with Michelin p4s for the rear. And I would prefer if you told me what tire specs I should match with the arc 8

Originally Posted by APEXRaceParts

Jason's lowered SS 1LE is sitting pretty on another set of our Camaro specific 19" ARC-8 wheels, this time in a staggered setup.

19x10" ET20 front wrapped in 285/35-19 Bridgestone RE71R
19x11" ET43 rear wrapped in 305/30-19 Bridgestone RE71R






- Cory

[Blackmonba6Gen]

Originally Posted by Qlimax

Did this set up require any mods? Pretty much I need a 19x11 rim that fits with a 305tire probably with Michelin p4s for the rear. And I would prefer if you told me what tire specs I should match with the arc 8

I've reached out to APEX regarding the same thing before I purchased my set and they told me it would be a direct fit without any modifications or clearance issues with or without MRC dampers. You can add 305 or 315s out back too and additional camber can be added up front via the factory setup. Here is a link to they site which is a fitment guide for out 6th gens depending on how you plan to use the car.

https://support.apexraceparts.com/hc...-Fitment-Guide

[Apex Wheels]

Originally Posted by Danew_377

For the arc-8 are there going to be any other colors besides the anthracite and satin black? Looking to get a set in your 19x10 as a square setup. Hoping for a bronze or copper.

Yes we do plan to come out with some bronze ARC-8 options in the future, I'd estiamte they are 4-5 months out depending on what size you run.

Originally Posted by Blackmonba6Gen

After a long decision looking at different wheel manufacturers, I just placed an order on the following setup from APEX ARC 8 the site say direct fit:
Front: 19x10” ET20 with 285/35-19 tires
Rear: 19x11” ET43 with 325/30-19 tires

Tires choices in mind: Nitto G2’s,NT01,Michelin PS4S

I do have MRC. Will the 325s cause any rubbing or issues with the strut with such a wide tire with stock height? I seen lots of threads with 305 but not 325 for an SS. It seem the 1LE are popular. I’ve been trying to find some photos with this setup to wrap my head around it and haven’t ran across any yet. If any photos please share as I’m curious to see how it will look before buying the tires. Thanks

325s will not be an issue to use out back with the 19x11" ET43. You could always run a small 3mm spacer if you wanted to get more room, but it's not required.

Originally Posted by Qlimax

Did this set up require any mods? Pretty much I need a 19x11 rim that fits with a 305tire probably with Michelin p4s for the rear. And I would prefer if you told me what tire specs I should match with the arc 8

Nope, this setup is a direct bolt on to any 6th Gen Camaro. I would use 275/35-19 or 285/35-19 up front on a 19x10" ET20, and then 305/30-19 out back on the 19x11" ET43.

[Apex Wheels]

Scott's vert is ready for sunny weather with a fresh set of our 19x10.5" ET35 rotatable square setup with ARP studs and 20mm spacers up front, wrapped in 295/35 Michelin Pilot Super Sports.






- Cory

[glamcem]

Took the car for a quick ride to the neighborhood market. This is how the car looks with them. I really like the concave and overall design

I think the most ideal fitment size for SS and ZL1 cars (except ZLE) would be something like 18x10.5 (~10mm offset) and 18x11.5" (~35) so that it wouldn't affect the balance of the car while being optimal fitment size for the front. 18x11" doesn't seem like possible and known that they rub the calipers slightly on the ZLE.







As you can see there's tons of clearance .. Also installed the temp stickers and will be testing Castrol SRF with Titanium shields this time. Let's see how much those will affect the temp readings (or make a difference)

[carguy55]

My 19x10.5 ET22 square track setup on 305 tires

[sr71bb]

Originally Posted by carguy55

My 19x10.5 ET22 square track setup on 305 tires

So you are running a 20MM spacer on the front????

305/30/19????

[carguy55]

Originally Posted by sr71bb

So you are running a 20MM spacer on the front????

305/30/19????

20mm is an option, but I have a 5mm spacer in the front with the strut mod and longer studs. Additional strut mod gives me front -3.0 camber