[Apex Wheels]

Checkout these awesome shots of Lynn's 5th Gen 1LE on a set of 19" ARC-8s in Anthracite Finish!

APEX Wheel Fitment Specs:

• Front: 19x10" ET20 ARC-8s with 285/35-19 Bridgestone RE71R
• Rear: 19x11" ET43 ARC-8s with 305/30-19 Bridgestone RE71R

Owner's Instagram

[Dabjbr]

Originally Posted by APEXRaceParts

18"
18x11" ET7 - front only
18x11" ET35 - rear, or front with 26mm spacer
18x12" ET41 - rear only

19"
19x10" ET20 - front/rear
19x11" ET11 - front only
19x11" ET35 - rear, or front with 26mm spacer
19x12" ET41 - rear only

All will have the direct fit center bore and knurled beads! Not to mention 18" will clear the ZL1 brakes and Z/28 Carbon too.

Have a 2020 SS1LE.

Fronts only? Is that because they’ll make contact with the rear fender?

I prefer Cameron specific square wheels but if these doesn’t work, looks like 19x10.5 et22 is the way to go. Right?

[SHessler]

Originally Posted by Dabjbr

Have a 2020 SS1LE.

Fronts only? Is that because they’ll make contact with the rear fender?

I prefer Cameron specific square wheels but if these doesn’t work, looks like 19x10.5 et22 is the way to go. Right?

Depends on if you want to run the big spacer for the front. You can go with the smaller spacer with 10.5's with a centering ring or the bigger spacer at 11.0.

I'm still on the fence a bit about the direction to go.

[c4racer]

I went with 19x10.5's ET35 square with a 16mm front spacer. Pics on page 4 post #52.
Note - the specs on the post are not correct, I think Apex sells a 20mm spacer, but I used a 16mm. Either will work, but the 16mm doesn't give as much poke on the wheels / tires.

On for a year - no issues, still loving the set-up. GMPP lowering kit going on the car shortly followed by an alignment with some neg camber.

[S2000_Europe]

I have my18 Zl1. I want a square set up with 19". I found that only apex ARC8 works:

19x10” ET20 with 285/35-19 tires but I will have smaller tires in the back

Front: 19x11” ET11 - 305/30-19
Rear: 19x11” ET43 - 305/30-19 but it is not truly a square set up.

in your fitment guide I found this:

Front and Rear: 19x10.5” ET22 with 305/30-19 tire BUT needs 12 mm spacer and negative camber in the rear, is this recommendation for just SS owners or spacers are needed for ZL1?

I am between sm10 and arc8

[sr71bb]

Originally Posted by S2000_Europe

I have my18 Zl1. I want a square set up with 19". I found that only apex ARC8 works:

19x10” ET20 with 285/35-19 tires but I will have smaller tires in the back

Front: 19x11” ET11 - 305/30-19
Rear: 19x11” ET43 - 305/30-19 but it is not truly a square set up.

in your fitment guide I found this:

Front and Rear: 19x10.5” ET22 with 305/30-19 tire BUT needs 12 mm spacer and negative camber in the rear, is this recommendation for just SS owners or spacers are needed for ZL1?

I am between sm10 and arc8

I run APEX SM-10 19 x 10.5 ET22 wheels on my SS 1LE all four corners with MS 4S 305 30 19 . This is rotatable and I do that every 4K miles. Tires has roughly 12K miles on them with 10 track days. Tires still have 60 per cent left. I DO NOT run a spacer up front but I did slightly grind the shock tower for clearance. I run 2.2 degrees NEGATIVE camber on front and 2.0 degrees negatve camber on the rear for my street setting. I change the camber on the front to - 3.6 degrees camber at the track using camber plates. Anything LESS than roughly -1.5 degrees negative camber, then you will have a small amount of tire poke at the top of the fender on BOTH the rear and front tires

[Bwaahhh]

sr71bb, mind posting pictures?

[sr71bb]

Originally Posted by Bwaahhh

sr71bb, mind posting pictures?

Already did. LOOK BACK UP AT POST 94 on PAGE 7 of this thread. That's with SG3 suspension installed,ZL1 brakes, and 1LE suspension.

[Apex Wheels]

Take a look at these rad photos our customer Kunal sent in last year of his 2018 Camaro SS 1LE on Satin Black 19" ARC-8s at Chuckwalla Valley Raceway.

APEX Wheel Fitment Specs:

• Front: 19x11" ET11 ARC-8s with 305/30-19 Goodyear Eagle F1 tires
• Rear: 19x12" ET41 ARC-8s with 325/30-19 Goodyear Eagle F1 tires
• Suspension: ZL1 1LE DSSV full suspension -3.6 degrees front camber and -2.4 degrees in back

Owner's Instagram: @kunal_the_foodie

[driven2exceSS]

Originally Posted by APEXRaceParts

Take a look at these rad photos our customer Kunal sent in last year of his 2018 Camaro SS 1LE on Satin Black 19" ARC-8s at Chuckwalla Valley Raceway.

Sexy and all, but they are still not these!!!!

Originally Posted by APEXRaceParts

We are aiming for Camaro Specific SM-10s to be available in March!

-Ian

[kropscamaro16]

Originally Posted by driven2exceSS

Sexy and all, but they are still not these!!!!

he has the sm10s on now 19x11 squared haha he was at the track with me in january for ongrid super gt cup

[TheRealJA105]

Originally Posted by APEXRaceParts

Take a look at these rad photos our customer Kunal sent in last year of his 2018 Camaro SS 1LE on Satin Black 19" ARC-8s at Chuckwalla Valley Raceway.

APEX Wheel Fitment Specs:

• Front: 19x11" ET11 ARC-8s with 305/30-19 Goodyear Eagle F1 tires
• Rear: 19x12" ET41 ARC-8s with 325/30-19 Goodyear Eagle F1 tires
• Suspension: ZL1 1LE DSSV full suspension -3.6 degrees front camber and -2.4 degrees in back

Owner's Instagram: @kunal_the_foodie

Tell him to get those tire deflectors off of there to get more air to his poor brakes. Then buy the track brake deflectors

[kropscamaro16]

Originally Posted by TheRealJA105

Tell him to get those tire deflectors off of there to get more air to his poor brakes. Then buy the track brake deflectors

haha i gave him some shit about those last time his is a ss 1le and he added em i have a 1ss and i removed them and then added the brake deflector kit

[Fijititan]

Originally Posted by TheRealJA105

Tell him to get those tire deflectors off of there to get more air to his poor brakes. Then buy the track brake deflectors

They are now off 😆 lol also added the GM performance bigger brake ducts. The old ducts didn’t scavenge much air.