[ride98red]

that's the shit right there!!!!!!!! ^

[MRRWheelsInc]

[2010 GDLUCK Camaro]

Has anyone powder coated or painted the 2016 Camaro rims yet? Need ideas. I had to downsize from 21s to 20s. Need help!

[MRRWheelsInc]

Here is a quick look at our Flagship FS01/ Classic concave mesh design.
Gloss black lite weight Flowforge construction.

[JustShootMe]

Originally Posted by MRRWheelsInc

Here is a quick look at our Flagship FS01/ Classic concave mesh design.
Gloss black lite weight Flowforge construction.

Attachment 823661

Attachment 823662

Attachment 823663

That silver car looks great , can't believe there aren't more silver cars out there.

[FlowForm_Wheels]

6th Gen Chevrolet Camaro with FlowForm FF15 Wheels in Fog thanks to Davenport Motorsports!

20x9 ET25 Fronts with 20x11 ET45 Rears

[zapdon]

lots of nice wheels and rides in this thread, hope to be able to post mine in here some day...hahaha

I have a question about some wheels i was looking at, verde v99 bronze wheels, specs are as follows:

fronts: 20x9 +20 running 265/275 tire
rears: 20x10.5 +42 running 295/305
bolt pattern: 5 x 120


Question is will these wheels fit and will any spacers be needed for them to run a 295/305 tire in the rear. also will the fronts stick out to far with +20. other options include +35 for front(guessing spacers would be needed) and +27 for rears, these any better for offsets?

thanks in advance for any replies.

did a quick photoshop of how these wheels would look like on my mosaic black.

[BradfordCamaro]

A 295 on a 9"!! That is pretty wide.
The offsets are fine.
About 11.5mm in the front and 10mm in the back.
If you want more just add a 5mm spacer.
You should look into a 265 and 285 combo for tires

[zapdon]

Originally Posted by BradfordCamaro

A 295 on a 9"!! That is pretty wide.
The offsets are fine.
About 11.5mm in the front and 10mm in the back.
If you want more just add a 5mm spacer.
You should look into a 265 and 285 combo for tires

fixed, forgot to write 265/275 up front. the 295/305 would be rears.
and thanks for the reply

[crankaholic]

9" width with ET20 is actually perfect for the front. That's what mine are, only in 19" and 245 section width tires. The rears should be ET35-37 to match that front offset though, otherwise your front track will be wider.

[Donner]

Hello,

Here are a couple of pictures of the Mighty HABU with her new shoes.

Kindest,

Donner

[zapdon]

Originally Posted by crankaholic

9" width with ET20 is actually perfect for the front. That's what mine are, only in 19" and 245 section width tires. The rears should be ET35-37 to match that front offset though, otherwise your front track will be wider.

so adding a 5mm spacer to the rears should put me where i wanna be. with a 5 mm spacer would i need longer studs or should they be fine.

[crankaholic]

Originally Posted by zapdon

so adding a 5mm spacer to the rears should put me where i wanna be. with a 5 mm spacer would i need longer studs or should they be fine.

That really depends on how much thread is left after you install, and that depends on wheel construction. A 5mm spacer shouldn't require new studs... but if it does, get ARP bolts or some other quality brand.

[Tyrolblue67]

Originally Posted by MRRWheelsInc

Here is a quick look at our Flagship FS01/ Classic concave mesh design.
Gloss black lite weight Flowforge construction.

Attachment 823661

Attachment 823662

Attachment 823663

These look amazing!
Can you please pm me a price shipped to 48323.
1LE/ZL1 sizes
Front 20 X 10 (25mm offset)
Rear 20 X 11 (43mm offset)
Thanks,
John