10-24-2023, 02:41 PM | #1 |
Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 54
|
Oil with btr cam
Getting my car a btr cam done this week. Shop said they’ll use Valvoline vr1 20-50 for break in. I’ve been using the mobil1 euro 0-40 since I’ve bought the car. Should I keep using the same oil or change it? What oil is recommended?
|
10-24-2023, 03:03 PM | #2 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,052
|
I agree with them... I would change the oil and filter in 500 miles back to your oil of choice.
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
10-30-2023, 01:01 PM | #3 |
Drives: V8 Camaro LT1 Join Date: May 2023
Location: US
Posts: 9
|
Yep, use the Valvoline VR1 20-50 break-in oil for the first 500 miles 'cause it will help to protect your new camshaft and lifters during the break-in process.
After the break-in period, you can switch back to Mobil 1 Euro 0-40 or another high-quality synthetic oil. Just start the engine and let it run at idle for 10-15 minutes (vary the RPM between 2,000 and 3,000 RPM for 20-30 minutes), then drive the car normally, but avoid hard acceleration and braking for the first 500 miles* Change the oil and filter after the first 500 miles. I follow these tips and they help me ensure that my new camshaft and lifters break in properly and last for many years to come) |
|
|
Post Reply
|
|
|