You are browsing camaro5 
 |
|
01-08-2020, 07:08 PM
|
#2605 |
|
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,719
|
Thx Don, made it home with them all!
__________________
|
|
|
|
01-08-2020, 07:41 PM
|
#2606 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Nice! Glad it was a safe trip...
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
02-16-2020, 01:52 PM
|
#2607 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
So its been a while, not much 'new' going on as I've picked up flying again -- so much fun doing that.
The car is doing fantastic and, today, was the first time in 5 months I gave it a 'full' bath (been driving it a bit). Did a power wash at the coin operated wash and then did my Gary Dean wash method with Detail Juice/Boost Juice and then some Adams detail spray. After 2 years and 3 months since I did paint correction, she still looks fantastic:   After all the road trips, racing, etc., the paint is holding up great! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
04-06-2020, 11:13 PM
|
#2608 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Hard to believe but 5 years since I did the first ADM LSA kit. She’s running great and I’ve enjoyed it. Not joy ridding as much — doing the volunteer shelter thing. Hope to get her out this weekend. E85 is so cheap now!
Sucks the virus shut down c-fest but lots of folks impacted. Lookin forward to next year... Still flying and waiting for the FAA to get their work done... Hope everyone is doing well... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
04-19-2020, 07:46 PM
|
#2609 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Well, have had a lot of request to show what the wing looks like out the rear window. Took the car out today -- drives fantastic! -- and got a shot of it:
 hope this helps folks get an idea of how it looks with the taller stanchions... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
04-23-2020, 09:19 AM
|
#2610 |
|
ZL1 Pilot
|
Looks great Don!
__________________
 GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
|
|
|
|
04-23-2020, 12:56 PM
|
#2611 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Thanks! Funny how folks want to see it from the inside...
She’s running great for sure :o) I’m assuming your still busy? -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
04-24-2020, 06:31 PM
|
#2612 |
|
ZL1 Pilot
|
Busy as a bee. Work hasn't stopped a bit.
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
|
|
|
|
08-20-2020, 10:51 PM
|
#2613 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Still alive and kicking! Flying much more - lots of fun there. Took the beast out tonight just to enjoy owning such a wild machine - still a blast to drive - loving the Recaros. Wing is still awesome.
Hope everyone is doing well and come on CFest! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
08-22-2020, 11:53 PM
|
#2614 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
So do you think the wing is pretty functional?? I’ve been watching out for a factory wing and see if I can order just the adapter to install on a 5th Gen trunk lid.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
08-23-2020, 10:09 AM
|
#2615 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
I’ve not raced it in a while but with speed it does (did test that ;o)
I have the higher stanchions and those appear to keep it in the rear flow.. Looks like C7 had one for the 5th gen at a decent price ($999 I think). If you don’t have the base support like I do, the center stanchion will need some trunk lid support... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-03-2020, 05:27 PM
|
#2616 |
Drives: 02 Camaro B4C Join Date: Nov 2016
Location: Cape May County NJ
Posts: 749
|
Any updates on the DSE Motor mounts?
__________________
A man's garage is his castle
1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel |
|
|
|
|
09-03-2020, 06:36 PM
|
#2617 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Well, I’m sitting on them right at the moment. I’ve been so busy with the flying, the opportunity has not presented itself to install them.
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
12-11-2020, 05:22 PM
|
#2618 |
|
Instagram: Mr2Hard2See
Drives: 2011 2SS/ RS Join Date: Apr 2018
Location: SF Bay Area
Posts: 691
|
Are you still running the 2.45 and 18% lower setup? If so how much boost are you pushing?
__________________
YOUTUBE CHANNEL: Mr2Hard2See
LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers |
|
|
|
|
|
|
|
 |
|
|
