Stock Air Intake Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nross33 · 07-02-2018, 02:46 PM

Hello All, so my car came with a K&N CAI on it. I am putting on the stock one and I am having a slight issue with the vacuum line. First off, this hose certainly doesn’t seem to be the hose that would have came on the car as it’s a “fuel” hose and eat to long. Second, it doesn’t really go in, it just kind of sits there. Do I need a new hose or is there an adapter I am missing or something? Any help would be appreciated.

Welker2 · 07-02-2018, 02:58 PM

You are missing a piece on the stock exhaust; there should be 'nipple' that goes in the that hole on the intake and sticks out so the hose can slip over it. I installed the K&N CIA on my SS and know that air vent hose was replaced with the one provided with the new system. Unfortunately, I tossed the stock air filter system, along with the OEM air vent hose and the part you need.

nross33 · 07-02-2018, 03:01 PM

Quote:

Originally Posted by Welker2

You are missing a piece on the stock exhaust; there should be 'nipple' that goes in the that hole on the intake and sticks out so the hose can slip over it.

Doesn’t the OEM hose come with that as par of the oem one? What would you call that part/line?

Welker2 · 07-02-2018, 03:08 PM

The K&N system comes with it's own air vent hose; I believe the OEM air vent tube is made out of aluminum and it has the piece you're missing attached to it (if I remember correctly)

nross33 · 07-02-2018, 03:12 PM

Quote:

Originally Posted by Welker2

The K&N system comes with it's own air vent hose; I believe the OEM air vent tube is made out of aluminum and it has the piece you're missing attached to it (if I remember correctly)

Looks like I need P# 92068690

Welker2 · 07-02-2018, 03:15 PM

Not sure of the part number, but here's a picture of what it should look like (at least the end that goes into the air intake) …

nross33 · 07-02-2018, 08:55 PM

Quote:

Originally Posted by Welker2

Not sure of the part number, but here's a picture of what it should look like (at least the end that goes into the air intake) …

Yep, that’s it! Thanks, part ordered.

07-02-2018, 02:46 PM	#1
nross33 Drives: 2015 Camaro LT- Gone 2010 Camaro SS Join Date: Dec 2015 Location: Irvine, CA Posts: 153	Stock Air Intake Question Hello All, so my car came with a K&N CAI on it. I am putting on the stock one and I am having a slight issue with the vacuum line. First off, this hose certainly doesn’t seem to be the hose that would have came on the car as it’s a “fuel” hose and eat to long. Second, it doesn’t really go in, it just kind of sits there. Do I need a new hose or is there an adapter I am missing or something? Any help would be appreciated.

07-02-2018, 02:58 PM	#2
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	You are missing a piece on the stock exhaust; there should be 'nipple' that goes in the that hole on the intake and sticks out so the hose can slip over it. I installed the K&N CIA on my SS and know that air vent hose was replaced with the one provided with the new system. Unfortunately, I tossed the stock air filter system, along with the OEM air vent hose and the part you need. __________________

07-02-2018, 03:08 PM	#4
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	The K&N system comes with it's own air vent hose; I believe the OEM air vent tube is made out of aluminum and it has the piece you're missing attached to it (if I remember correctly) __________________

07-02-2018, 03:15 PM	#6
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Not sure of the part number, but here's a picture of what it should look like (at least the end that goes into the air intake) … Attached Images __________________