[BMWM.D.]

https://www.camaro6.com/forums/attac...1&d=1540309056

This is the one that I did on my car. Worth a look in my opinion.

[Jason18ZL1LE]

Originally Posted by BMWM.D.

I would definitely check out the wiring near the passenger headlight. There is a service campaign to add extra protection to it, as it can rub on a sharp edge and cause all kinds of issues. The harness on my 18 had a heavy gouge in it, and I have no doubt it would have worn through given more time. I could definitely see this being an issue aggravated by turning.

There’s actually 3 different wiring related bulletins for these cars. I’ll try to find them.

We’ve inspected that harness and it doesn’t look worn through but perhaps I will undo some of the wrap and inspect further.

[BMWM.D.]

Originally Posted by Jason18ZL1LE

We’ve inspected that harness and it doesn’t look worn through but perhaps I will undo some of the wrap and inspect further.

I had a noticeable gouge in my insulation in that area, though I don’t have any issues with the car. If you don’t have any hard contact/gouging, then it’s probably fine. I have seen wires broken or damaged under insulation though. So I’d take a closer look.

Btw...I work next to a friend of yours. Small world.

[Jason18ZL1LE]

Mine doesn’t have the added abbrasion sleeve but there is definitely a notch in the tape. The car is at GM right now for an unrelated issue so I will have them inspect it.

[BMWM.D.]

Originally Posted by Jason18ZL1LE

Mine doesn’t have the added abbrasion sleeve but there is definitely a notch in the tape. The car is at GM right now for an unrelated issue so I will have them inspect it.

Are they fixing the diff issue?

[Jason18ZL1LE]

They are! Service manager said “you didn’t mod the differential so the way I see it, the warranty is in tact”

[Jason18ZL1LE]

GM Called me and said they peeled back the insulation on the recalled harness and some of my wires were damaged under the sleeve. Hope this fixes me issue

[angryBits]

Originally Posted by Jason18ZL1LE

Which issue did you have on the Z06? The Stabilitrak or the fuel pump voltage?

Stabilitrak

Originally Posted by Jason18ZL1LE

GM Called me and said they peeled back the insulation on the recalled harness and some of my wires were damaged under the sleeve. Hope this fixes me issue

Thats great news! Now we know in case this happens to anyone else.

Nothing sucks like hard to diagnose problems on a new car.

[Jason18ZL1LE]

With my luck I won’t believe it’s fixed until I see it. But it does explain the weirdness

[waterman]

Originally Posted by Jason18ZL1LE

Can you link me to the TSB?

Here is that TSB that I believe you are looking for.
https://www.camaro6.com/forums/attac...1&d=1543981177

Here are 2 more that you might have addressed while they have your car.

https://www.camaro6.com/forums/attac...1&d=1543981177

https://www.camaro6.com/forums/attac...1&d=1543981177

[waterman]

I should have read BMWM.D.s post. looks like he already hooked you up.

[kwav8r]

Originally Posted by waterman

Here is that TSB that I believe you are looking for.
https://www.camaro6.com/forums/attac...1&d=1543981177

Here are 2 more that you might have addressed while they have your car.

https://www.camaro6.com/forums/attac...1&d=1543981177

https://www.camaro6.com/forums/attac...1&d=1543981177

We need a damn 'sticky' or section dedicated to TSBs and Recalls....

[BMWM.D.]

Originally Posted by Jason18ZL1LE

GM Called me and said they peeled back the insulation on the recalled harness and some of my wires were damaged under the sleeve. Hope this fixes me issue

Awesome. I haven’t looked at a wiring diagram to figure out what exactly is in that harness, but I’m pretty confident this will fix your issue.

[kwav8r]

Originally Posted by Jason18ZL1LE

GM Called me and said they peeled back the insulation on the recalled harness and some of my wires were damaged under the sleeve. Hope this fixes me issue

That's great news! Let us know if it actually fixed the problem.