You are browsing camaro6 
08-28-2021, 01:29 PM
|
#1 |
 Drives: 2016 2SS Join Date: Jun 2020
Location: Bangor
Posts: 14
|
GM Performance SS1LE spec handling suspension upgrade
Brand new in box.
From the GM WEB SITE. Enhance your vehicle's road-handling performance with this Suspension and Sway Bar Upgrade System. This system uses the same hardware and shock calibration† as the production 1LE. The stiffer stabilizer bars, higher-rate springs and handling links reduce body roll and increase steering precision and feel. MR Shock calibration has been specially tuned to optimize ride and handling with the increased spring and stabilizer bar rates. Available exclusively for Camaro SS models with Magnetic Ride Control. PART NO. 84233245. 84556736 The Bad part: Kit came with 2 Right side Handling Links. It needs a Left side Handling links part number 23317367 ( about $80). MRC SOFTWARE update is for model year 2017+ MODEL YEAR 2016 CAMARO SS will not work due to different soft ware in the car. Ask me how I know. No shipping at this time. The box it came in is pretty flimsy and beat up. It will not hold together for another shipment Pick up only in NE PA. BANGOR. 18013 I HAVE 2 OF THESE KITS BOTH WITH TERRIBLE SHIPPING BOX AND 2 RIGHT SIDE HANDLING LINKS $1000. Each John. 484 five four one. 9 two two 5 Last edited by Lemik69; 09-02-2021 at 07:58 PM. Reason: Added picture |
|
|
|
09-11-2021, 10:33 PM
|
#2 |
|
Drives: 2016 2SS Join Date: Jun 2020
Location: Bangor
Posts: 14
|
Bump. Normally 1395 shipped from retailer. Save 395 by picking it up!
|
|
|
|
|
09-12-2021, 01:25 AM
|
#3 |
 
Drives: 2021 Camaro LT1 Join Date: Aug 2013
Location: Weehawken, NJ
Posts: 95
|
This will not work on vehicles with no magna ride?
|
|
|
|
|
09-14-2021, 04:59 AM
|
#4 |
|
Drives: 2016 2SS Join Date: Jun 2020
Location: Bangor
Posts: 14
|
I think all the parts should fit except for the front Springs
I don't think they will work because the front shocks are different between the MRC shock / strut and the NON MRC shock/strut |
|
|
|
|
12-06-2021, 05:23 PM
|
#5 |
|
Drives: 2016 2SS Join Date: Jun 2020
Location: Bangor
Posts: 14
|
TTT
|
|
|
|
|
02-05-2022, 05:43 AM
|
#6 |
|
Drives: 2016 2SS Join Date: Jun 2020
Location: Bangor
Posts: 14
|
TTT
|
|
|
|
|
02-05-2022, 06:47 AM
|
#7 |
            
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,575
|
Just a suggestion, but you may have better luck with the sale if you include the missing LHS handling link. You first posted this in last August, so it's been a while, buyers may not want to put $1k into uncertainty.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
