M6 launch bog issue, what exactly is it? I can't get mine to do it... - Page 3

exxit · 12-01-2017, 02:57 PM

Quote:

Originally Posted by Gen6 softtop

I know launch control in the SS basically takes care of the gas control, meaning you can just hold it to the floor. However the clutch release is all driver control. Just because the car bogs doesn't necessarily mean you need to leave at a higher rpm! That's a good way to snap axle shafts and drive shafts! If your bogging, slip the clutch a tad more!

The engine cuts throttle to 20% and pulls timing. Definitely more than just clutch play involved.

Fraxum · 12-01-2017, 05:28 PM

Quote:

Originally Posted by exxit

The engine cuts throttle to 20% and pulls timing. Definitely more than just clutch play involved.

That definitely happens? I hear people say that's what my launch sounds like. I thought it was me some how subconsciously punking out. I very rarely spin at the line. I also have bogged at the line and then spun at the top of first going well into second when there is bad prep. Time to go home when that happens.

exxit · 02-15-2019, 01:41 PM

Ressing some ancient history but here is some video context.
This drove me to ultimately leave the platform and will not be looking back for the time being.

https://m.youtube.com/watch?v=fVrkJlXA7bM

PRAY · 02-15-2019, 01:43 PM

Ummm, we solved that a long time ago.

Pindecko · 06-22-2019, 08:39 PM

Quote:

Originally Posted by PRAY

Ummm, we solved that a long time ago.

You solved the bogging issue? Sorry if I misunderstood here

Lt4zl1 · 04-06-2020, 06:33 PM

Anyone that would like to know how to do this just reach out to me. I figured it all out this weekend. Both that and how to make the car rev really good command a full 92 percent throttle opening when it’s revving. I had the car making 12 psi of boost just like any old school gen 4 vehicle. Car now revs as well as my 07 Tahoe with an lsa blower on it. No more lazy 40 percent open throttle. And for launch on a tire I have the car at full throttle by 5 mph on a 2017 m6 car and it’s driving more like a wired throttle now. Very simple to do if your doing your own tuning with hptuners and I will share how to do all of this.

brannon · 04-12-2020, 10:51 AM

I'd love to know how to solve the issue. I've been to 3 tuners and they don't know how to fix it. 18 ZL1 M6

Oak78 · 04-19-2020, 12:56 AM

I would also like to know. I’ve asked numerous times but have not got a definitive answer as to whether it can be fixed or not.

RobbyBeefcake87 · 04-26-2020, 10:20 AM

Quote:

Originally Posted by Lt4zl1

Anyone that would like to know how to do this just reach out to me. I figured it all out this weekend. Both that and how to make the car rev really good command a full 92 percent throttle opening when it’s revving. I had the car making 12 psi of boost just like any old school gen 4 vehicle. Car now revs as well as my 07 Tahoe with an lsa blower on it. No more lazy 40 percent open throttle. And for launch on a tire I have the car at full throttle by 5 mph on a 2017 m6 car and it’s driving more like a wired throttle now. Very simple to do if your doing your own tuning with hptuners and I will share how to do all of this.

Your 9.5 blower only record was done on an m6 car?... you should run Iconic gt500, he was on here looking for a zl1 to run against his gt500.

Flowtie1 · 06-29-2020, 02:14 PM

Dying to solve the bog issue. Will be adding headers and exhaust in a week and will need to tune. Lt4zl1 can I reach out to you in the near future ?

bobby35ny · 06-29-2020, 03:20 PM

Quote:

Originally Posted by Lt4zl1

Anyone that would like to know how to do this just reach out to me. I figured it all out this weekend. Both that and how to make the car rev really good command a full 92 percent throttle opening when it’s revving. I had the car making 12 psi of boost just like any old school gen 4 vehicle. Car now revs as well as my 07 Tahoe with an lsa blower on it. No more lazy 40 percent open throttle. And for launch on a tire I have the car at full throttle by 5 mph on a 2017 m6 car and it’s driving more like a wired throttle now. Very simple to do if your doing your own tuning with hptuners and I will share how to do all of this.

Any videos on those runs? I LOVE stick car videos.

Jhunsberger · 06-29-2020, 03:27 PM

Quote:

Originally Posted by bobby35ny

Any videos on those runs? I LOVE stick car videos.

I just posted 2 videos of my Whipple SS M6: https://www.camaro6.com/forums/showt...=541046&page=3

bobby35ny · 06-29-2020, 04:24 PM

Quote:

Originally Posted by Jhunsberger

I just posted 2 videos of my Whipple SS M6: https://www.camaro6.com/forums/showt...=541046&page=3

If my 17 ZL1 M6 left like that I would have NEVER sold it, LOL

Jhunsberger · 06-30-2020, 06:27 AM

Quote:

Originally Posted by bobby35ny

If my 17 ZL1 M6 left like that I would have NEVER sold it, LOL

It didnt leave like that last year, had to get the torque management tuned out of it, thanks to EFX in NJ.

02-15-2019, 01:41 PM	#31
exxit Drives: 2016 1SS D1SC Methfed Lowered Wrapd Join Date: Apr 2016 Location: CA Posts: 632	Insight Ressing some ancient history but here is some video context. This drove me to ultimately leave the platform and will not be looking back for the time being. https://m.youtube.com/watch?v=fVrkJlXA7bM __________________ //2016 1SS M6 D1SC Upgraded IC 4.25 Pulley// // Alky Control Meth Kit running 100% methanol // (purchased from JDP, installed by True Bliss Customs, tuned by NewEraPerformance in Augora Hills) // 3M/Gotch Design Sponsored Gloss Deep Space Colorshift Wrap //

02-15-2019, 01:43 PM	#32
PRAY Drives: 2016 2SS Join Date: Jul 2016 Location: Sanford NC Posts: 2,766	Ummm, we solved that a long time ago. __________________ 2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.

04-06-2020, 06:33 PM	#34
Lt4zl1 Drives: 2017 zl1 camaro Join Date: Feb 2019 Location: Florida Posts: 51	Anyone that would like to know how to do this just reach out to me. I figured it all out this weekend. Both that and how to make the car rev really good command a full 92 percent throttle opening when it’s revving. I had the car making 12 psi of boost just like any old school gen 4 vehicle. Car now revs as well as my 07 Tahoe with an lsa blower on it. No more lazy 40 percent open throttle. And for launch on a tire I have the car at full throttle by 5 mph on a 2017 m6 car and it’s driving more like a wired throttle now. Very simple to do if your doing your own tuning with hptuners and I will share how to do all of this. __________________ 9.52@143 first bolt on only car to reach 9.50s. First zl1 in the 9s on stock unported blower. Sbe LME heads gptuning cam typical mods jokerz prototype port blower 9.30@150 best so far work in progress. 4.70 60-130 at 3800da now in Tennessee.

06-29-2020, 02:14 PM	#38
Flowtie1 Drives: 2017 ZL1 Join Date: Apr 2020 Location: South florida Posts: 332	Dying to solve the bog issue. Will be adding headers and exhaust in a week and will need to tune. Lt4zl1 can I reach out to you in the near future ? __________________ 2017 ZL1 M6 Silver Ice Metallic

04-12-2020, 10:51 AM	#35
brannon Drives: 2018 ZL1 Join Date: Aug 2018 Location: TN Posts: 2	I'd love to know how to solve the issue. I've been to 3 tuners and they don't know how to fix it. 18 ZL1 M6

04-19-2020, 12:56 AM	#36
Oak78 Drives: 2018 ZL1 1LE Join Date: Jun 2019 Location: Cali Posts: 27	I would also like to know. I’ve asked numerous times but have not got a definitive answer as to whether it can be fixed or not.

User Name		Remember Me?
Password