You are browsing camaro6 
11-02-2019, 07:35 PM
|
#1 |
 Drives: camaro 1SS Join Date: Aug 2019
Location: GA
Posts: 39
|
My stereo install and have a question
Got the T harness and my question is. Do I have to buy a RCA converter or can I just put RCA end connectors on the end of the T harness wires??
|
|
|
|
11-02-2019, 07:40 PM
|
#2 |
|
Drives: camaro 1SS Join Date: Aug 2019
Location: GA
Posts: 39
|
Finished install just have to run wires for RCA input
|
|
|
|
|
11-03-2019, 09:05 PM
|
#3 |
 
Drives: 17 Camaro lt, 22 Camaro LT1 Join Date: Nov 2016
Location: Beaver, PA
Posts: 411
|
Wow. That's really nice. Were did you get the sheet of foam? Also, is that red power wire going to be ok against that bracket?
|
|
|
|
|
11-05-2019, 06:46 PM
|
#4 |
|
Drives: camaro 1SS Join Date: Aug 2019
Location: GA
Posts: 39
|
i used 1/2 particle board and wrapped it in that black carpet. Got the carpet had the fabric store. l sprayed it down with spray glue and you Staples on bottom side.. Going to wrap the negative and positive in wire Loom. That was just a quick fitment picture. Here is a pic before the carpet
|
|
|
|
|
11-05-2019, 06:50 PM
|
#5 |
|
Drives: camaro 1SS Join Date: Aug 2019
Location: GA
Posts: 39
|
before the cartep
|
|
|
|
|
11-06-2019, 08:59 AM
|
#6 |
|
Drives: Chevrolet Camaro SS Join Date: Jan 2019
Location: DeSoto, GA
Posts: 48
|
Where is the first picture taken? Is that the factory radio module?
|
|
|
|
|
11-09-2019, 07:41 PM
|
#7 |
|
Drives: camaro 1SS Join Date: Aug 2019
Location: GA
Posts: 39
|
took it out of the back of the trunk relocated it in the left corner panel
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
