2018 camaro tail light wiring diagram

lynyrd · 08-12-2022, 06:48 AM

Hello,
Does anyone have the pinout for the 2016 - 2018 Camaro rear connectors, 6 pin pinout?
Like that (2019), but 2016 - 2018!
Thanks in advance.

Trochoidal · 08-12-2022, 03:49 PM

There are two PDF’s in this thread for 2019 tail lights. I see you asked for 2018 but this might help. IDK if there’s a difference but I can’t see why there would be a different harness/connector between the 2 years.

https://www.camaro6.com/forums/showthread.php?t=572223

lynyrd · 08-13-2022, 11:16 AM

The European model has only 6 pins, the rear lights have changed, from 2016 to 2018 there is one model and from 2019 to 2022 another.
And on the connections indicated on the X410 and X420 PDFs, there are 8 pins.
The European left rear light has an additional fog light, which is not there on the US model.

lynyrd · 08-21-2022, 07:55 AM

Hello,
I installed the American taillights on my European, I had to reverse the turn signal with the reverse light.

The American version has the reversing lights in the rear lights, the European in the bottom of the bumper.

I tried to connect pin 2 of the bumper connector to pin 3 of the tail light connector, no light.

Normally the ground is already connected in the rear light, is the ground pin of the bumper connector needed?

When I leave the bumper connector plugged in, the reverse light and the bumper fog light work.

When I remove the connector from the bumper and connect the ground (pin 1) and the reverse light (pin 2) or the fog light (pin 3) with a multimeter, I have nothing.

If you have an idea of the problem, thank you in advance!

arpad_m · 08-21-2022, 08:18 AM

I'd check the wiring in the schematics, see below.

T90 is the RPO for the Europe/Asia spec lighting, the diagrams show it as a variant indicator ("T90" means the signal path is for the EU/AS spec, "-T90" means it's for the US spec).

Color coding is as follows:

Code:

BK  Black 
BN  Brown 
BU  Blue 
GN  Green 
GY  Gray 
PK  Pink 
RD  Red 
VT  Violet 
YE  Yellow 
WH  White

lynyrd · 08-21-2022, 08:36 AM

I tried to connect pin 2 of the bumper connector with pin 3 of the fire, nothing!

lynyrd · 08-31-2022, 07:05 AM

Hello,
Where do you think I should connect the ground from the bumper connector to the negative pole 1 or the negative lines of the position lights 2?
Thanks.

08-12-2022, 06:48 AM	#1
lynyrd Drives: Camaro 2.0 LT 2018 Join Date: Nov 2021 Location: Belgium Posts: 197	2018 camaro tail light wiring diagram Hello, Does anyone have the pinout for the 2016 - 2018 Camaro rear connectors, 6 pin pinout? Like that (2019), but 2016 - 2018! Thanks in advance. Attached Images __________________ 2018 Camaro 2.0 LT Turbo. Conversion to ethanol E85 K&N Typhoon filter Front Bumper and rear diffuser ZL1/1LE LED headlights Last edited by lynyrd; 08-16-2022 at 05:32 AM.

08-12-2022, 03:49 PM	#2
Trochoidal Drives: 2017 Camaro 2SS A8 Join Date: May 2019 Location: USA Posts: 1,656	There are two PDF’s in this thread for 2019 tail lights. I see you asked for 2018 but this might help. IDK if there’s a difference but I can’t see why there would be a different harness/connector between the 2 years. https://www.camaro6.com/forums/showthread.php?t=572223 __________________ Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“

08-13-2022, 11:16 AM	#3
lynyrd Drives: Camaro 2.0 LT 2018 Join Date: Nov 2021 Location: Belgium Posts: 197	The European model has only 6 pins, the rear lights have changed, from 2016 to 2018 there is one model and from 2019 to 2022 another. And on the connections indicated on the X410 and X420 PDFs, there are 8 pins. The European left rear light has an additional fog light, which is not there on the US model. Attached Images __________________ 2018 Camaro 2.0 LT Turbo. Conversion to ethanol E85 K&N Typhoon filter Front Bumper and rear diffuser ZL1/1LE LED headlights

08-21-2022, 07:55 AM	#4
lynyrd Drives: Camaro 2.0 LT 2018 Join Date: Nov 2021 Location: Belgium Posts: 197	Hello, I installed the American taillights on my European, I had to reverse the turn signal with the reverse light. The American version has the reversing lights in the rear lights, the European in the bottom of the bumper. I tried to connect pin 2 of the bumper connector to pin 3 of the tail light connector, no light. Normally the ground is already connected in the rear light, is the ground pin of the bumper connector needed? When I leave the bumper connector plugged in, the reverse light and the bumper fog light work. When I remove the connector from the bumper and connect the ground (pin 1) and the reverse light (pin 2) or the fog light (pin 3) with a multimeter, I have nothing. If you have an idea of the problem, thank you in advance! __________________ 2018 Camaro 2.0 LT Turbo. Conversion to ethanol E85 K&N Typhoon filter Front Bumper and rear diffuser ZL1/1LE LED headlights Last edited by lynyrd; 08-21-2022 at 08:32 AM.

08-21-2022, 08:18 AM	#5
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,565 View My Garage	I'd check the wiring in the schematics, see below. T90 is the RPO for the Europe/Asia spec lighting, the diagrams show it as a variant indicator ("T90" means the signal path is for the EU/AS spec, "-T90" means it's for the US spec). Color coding is as follows: Code: BK Black BN Brown BU Blue GN Green GY Gray PK Pink RD Red VT Violet YE Yellow WH White Attached Images __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

08-21-2022, 08:36 AM	#6
lynyrd Drives: Camaro 2.0 LT 2018 Join Date: Nov 2021 Location: Belgium Posts: 197	I tried to connect pin 2 of the bumper connector with pin 3 of the fire, nothing! __________________ 2018 Camaro 2.0 LT Turbo. Conversion to ethanol E85 K&N Typhoon filter Front Bumper and rear diffuser ZL1/1LE LED headlights

08-31-2022, 07:05 AM	#7
lynyrd Drives: Camaro 2.0 LT 2018 Join Date: Nov 2021 Location: Belgium Posts: 197	Hello, Where do you think I should connect the ground from the bumper connector to the negative pole 1 or the negative lines of the position lights 2? Thanks. Attached Images __________________ 2018 Camaro 2.0 LT Turbo. Conversion to ethanol E85 K&N Typhoon filter Front Bumper and rear diffuser ZL1/1LE LED headlights Last edited by lynyrd; 09-01-2022 at 07:00 AM.

User Name		Remember Me?
Password