05-03-2023, 07:24 AM | #1 |
Drives: 2019 Summit white ZL1 1LE M6 Join Date: Jan 2017
Location: East TN
Posts: 42
|
2019 1le mirror housing passenger side
So mine appears to have been hit by concentrated sunlight and started to melt.... anyone have any leads on where I can get a replacement? Passenger side Mirror works and glass is fine... just the housing got toasted lol.
|
05-03-2023, 11:39 AM | #2 |
Faster!!!
Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020
Location: Long Island NY
Posts: 991
|
I had to replace one on my 2020 1LE before. I could never find a 1LE specific mirror due to the satin finish, most I found are body colored.
I ended up buying an unpainted housing ~$100 I think it was, then had it painted. Then just swapped my motor, glass, etc. FYI, the satin black on those is actually regular standard black GM paint, it is the clear coat that makes it satin. |
05-03-2023, 04:57 PM | #3 | |
Drives: 2019 Summit white ZL1 1LE M6 Join Date: Jan 2017
Location: East TN
Posts: 42
|
Quote:
|
|
05-04-2023, 04:55 AM | #4 |
Faster!!!
Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020
Location: Long Island NY
Posts: 991
|
I believe this is it: 84788172
The paint was just generic GM black and I used a 4K satin lacquer clear, three coats put it just about an exact match. Or, have a shop do it. The clear is the tricky part. I also used a plastic primer prior to black to insure adhesion. 2+ plus years looks factory! |
05-04-2023, 09:23 AM | #5 | |
Drives: 2019 Summit white ZL1 1LE M6 Join Date: Jan 2017
Location: East TN
Posts: 42
|
Quote:
|
|
05-04-2023, 09:28 AM | #6 | |
Faster!!!
Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020
Location: Long Island NY
Posts: 991
|
Quote:
The satin clear I just got from an automotive paint shop I found online. That was the scary part, getting a match. I originally had assumed the paint itself was satin, but the body shop servicing my chevy dealer explained it is regular gloss black. I would've been chasing ghosts if he didn't set me straight!!!! lol |
|
05-04-2023, 03:27 PM | #7 |
Long hauler
|
I was under the impression that the satin black on the 1LE’s are just wraps. The hood is wrapped for sure, I believe the mirror is wrapped as well maybe?
__________________
|
05-04-2023, 08:09 PM | #8 |
Drives: '18 1SS 1LE Join Date: Sep 2017
Location: Pennsyltucky
Posts: 2,571
|
Hood is the only item wrapped.
Splitter, mirrors, and spoiler are painted.
__________________
'18 1SS 1LE Black, PDR
|
05-05-2023, 04:52 AM | #9 |
Faster!!!
Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020
Location: Long Island NY
Posts: 991
|
|
05-05-2023, 09:39 AM | #10 |
Drives: 2024 Black ZL1, M6 Join Date: Mar 2014
Location: Murrieta, CA
Posts: 324
|
No the mirrors, splitter and spoiler are painted.
__________________
|
05-07-2023, 06:13 PM | #11 | |
Quote:
__________________
2022 SS 1LE - Summit White
2023 ZL1 On Order (Unless I supercharge the 1LE first...) |
||
05-28-2023, 05:25 PM | #12 |
Drives: 2019 Summit white ZL1 1LE M6 Join Date: Jan 2017
Location: East TN
Posts: 42
|
|
05-28-2023, 05:43 PM | #13 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Housing's the same, if you swap the internals and electronics over from your car, you should be fine indeed.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
Post Reply
|
|
|