[Jhunsberger]

2017 Camaro 1SS Hyper Blue Metallic M6
Current Milage: 18,5xx (as of 04/18/22)

Bought new in October of 2016

Whipple supercharger installed in June of 2018 with approximately 13,5xx miles on the car, so approx 5,000 miles on the supercharger since 2018. (details below)

Plenty of build info and progression on this Camaro6 site.
Reason for selling: Just looking to do something else.

I take great care of everything I own, the car has always been garage kept. Engine oil change every 3,000 miles or less, trans fluid is fresh from rebuild in February 2021, rear diff has been changed 2x.

Car is ceramic coated and windows are tinted.

Some stock part available: Exhaust, cats, driveshaft, axles, clutch and smaller items from Whipple install.
Not available: Stock wheels, intake, airbox, throttle body and exhaust manifolds.

Car has been a 10.705 @ 131.92mph in the 1/4 mile and has also been driven on numerous weekend trips and all-day road trips with ZERO mechanical issues.

Exterior: 8.5-9 / 10
Interior: 10 / 10
Mechanical: 10 / 10

Asking: $36,000 (offers welcome, no trades)
Bank currently holds title.

Current street wheels and tires:
Front: MRR M228 20 x 9 with Continental Extreme Contact Sport 275/35/20
Rear: MRR M228 20 x 11 with Nitto NT555R 305/35R20
(Right rear wheel has some scratches around the lip from falling over during a tire change)

Track wheels and tires:
Front: Race Star 92's 17x4.50 with M/T ET FRONT 27.5/4.0-17
Rear: Race Star 92's 17x10.5 with M/T ET STREET R BIAS 28x11.5-17

List of modifications:
2017 Camaro SS M6 stock 429hp/440tq (April 2018)
Tuned by EFX in NJ 688hp/632tq (March 2020) on 93 pump gas
Whipple SC, 3.500" pulley
LT4 low side & high side fuel pumps and injectors
Roto-fab big gulp intake
NW 103 TB
Kooks jet coated 2" LTH (No Cats)
Borla Atak full exhaust, no cats with a borla resonator
McLeod RXT Clutch
Hanlon rebuilt Tremec TR6060 transmission
Hurst short throw shifter
DSS axles
Gforce AL driveshaft
Drive shaft loop
Catch can and metco breather
LS3 front crank seal
P3 multi gage w/ analog boost input
PCM manual fan switch
Granatelli plug wires
NGK-6510 plugs

Photo Gallery: https://photos.app.goo.gl/rbcvnHqtH9Bu1e1L9

Dyno Sheets: https://drive.google.com/drive/folde...LK?usp=sharing

[Joshinator99]

Wow, great buy for someone! Hopefully it stays on Camaro6 after the sale. Good luck!

[Jhunsberger]

Originally Posted by Joshinator99

Wow, great buy for someone! Hopefully it stays on Camaro6 after the sale. Good luck!

Thanks Josh! I am glad to see there has been some interest....

[Konnerfallos1]

You say the bank holds the title, implying you're still paying it off. So you're asking 38, but how much is left for payments on the car? Im only asking because I assume the buyer would be taking them over from you...

[arpad_m]

Fantastic car with great upgrades. It would sure sell easier if you had the title in hand. If I sold the car, I'd pay it off first and wait for 2-3 weeks before the title arrives.

[Jhunsberger]

Originally Posted by Konnerfallos1

You say the bank holds the title, implying you're still paying it off. So you're asking 38, but how much is left for payments on the car? Im only asking because I assume the buyer would be taking them over from you...

The buyer would would not take over the payments. They would pay the bank the agreed selling pricing, which would pay the loan off and the balance goes to me. Title would be mailed to me then I would pass it on to the buyer. Wish I has enough cash on hand to just pay it off so it would be a cleaner deal and I would have the title in hand, but I don't.

[Jhunsberger]

Morning Bump, had some offers but nothing has gone thru yet.

[Jhunsberger]

Price reduced: $36,000

Reach out with any questions.

[6spdhyperblue]

Man what a deal for a beaut

[Jhunsberger]

Sale Pending.

[Jhunsberger]

SOLD and on its Way to AZ.