Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Camaro Issues / Problems | Warranty Discussions | TSB and Recalls


AWE Tuning


Post Reply
 
Thread Tools
Old 06-26-2019, 03:27 PM   #1
BradfordCamaro
SABIO
 
BradfordCamaro's Avatar
 
Drives: 2016 CAMARO 1SS
Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
My turn for enigine misfire P0300

Dealer replaced A=C compressor and the lines.
Now it is misfiring. Yippee. P0300 and P0305
Of course the dealer can do nothing.

In contact with my shop. (90 min drive)
Any thoughts?

No dealer bashing please. Doesn't help.
__________________



BradfordCamaro is offline   Reply With Quote
Old 06-26-2019, 04:27 PM   #2
Mosaic6SS
 
Drives: Camaro
Join Date: May 2019
Location: Earth
Posts: 81
I recently replaced my plugs due to a terrible idle (didn’t help much). However I noticed the spark plug on cylinder number one is really close to the AC compressor and lines there. You may want to check that plug and wire to make sure it wasn’t damaged or the plug wire is seated all the way. Other than that I found these TSBs.

I doubt this is your problem since the issue started after they did the work. But may give you ammunition to make them take a serious look at it instead of just resetting the light and sending you 90 minutes back.
Attached Images
 
Mosaic6SS is offline   Reply With Quote
Old 06-26-2019, 05:52 PM   #3
EMTNLSS
 
EMTNLSS's Avatar
 
Drives: 2016 Hyper Blue 2SS
Join Date: Feb 2016
Location: Layton, UT
Posts: 498
Yea i'd check the wires and plugs first. I had a misfire a few days ago at idle and it was just a loose spark plug wire that pretty much fell off right as I touched it. Secured it back on and runs fine now.

I've also had the p0300 code before and I had to replace 2 injectors but this probably isn't your issue since it started after they worked on it.
__________________
2SS Hyper Blue Metallic | A8 | Jet Black Interior | NPP Exhaust

Current Mods: Catch Can | aFe Lowering Springs | GM 2nd Gen Splitter | Hotchkis Sway Bars | MRR FS02 Wheels | Flowmaster Exhaust | Dark Tail Lights | Diode Dynamics Sidemarkers | Roto Fab | Solar TB | PRAY Ported IM | BMR | PRAY Tune

Upcoming Mods:
EMTNLSS is offline   Reply With Quote
Old 06-26-2019, 07:37 PM   #4
BradfordCamaro
SABIO
 
BradfordCamaro's Avatar
 
Drives: 2016 CAMARO 1SS
Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
TSB's are out...Cam and heads saw to that.

90 minute drive is to the performance shop that did my build.
Dealer is 5 minutes away.
__________________



BradfordCamaro is offline   Reply With Quote
Old 06-27-2019, 05:16 PM   #5
avalonandl

 
avalonandl's Avatar
 
Drives: 2019 ZL-1
Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
Plug wire not fully inserted into one of the coils?
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...

2012 Yukon XL Denali w/ 6.2 AWD
avalonandl is offline   Reply With Quote
Old 05-03-2021, 03:00 PM   #6
joeyazzata29
j1ss
 
Drives: '21 2SS 1LE
Join Date: Dec 2019
Location: Florida
Posts: 384
What ended up being the cause of this?
joeyazzata29 is offline   Reply With Quote
Old 06-24-2021, 08:49 PM   #7
joeyazzata29
j1ss
 
Drives: '21 2SS 1LE
Join Date: Dec 2019
Location: Florida
Posts: 384
Did you ever find out what happened here?
joeyazzata29 is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:53 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.